DSE704 Generator Controller
The DSE704 is an Auto Mains Failure Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor engine temperature, low oil pressure, fail to start, charge failure, over speed and under speed. When the module detects a fault condition it automatically shuts down the engine. The module also includes two user configurable auxiliary inputs. The module has been designed to automatically start the generator when the mains (utility) power fails. As soon as mains (utility) power is restored the module has been designed to transfer the load back to the mains (utility) supply. The module then instructs the engine to begin the cool down procedure and stopping sequence (user configured).
The DSE704 is an Auto Mains Failure Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor engine temperature, low oil pressure, fail to start, charge failure, over speed and under speed. When the module detects a fault condition it automatically shuts down the engine. The module also includes two user configurable auxiliary inputs. The module has been designed to automatically start the generator when the mains (utility) power fails. As soon as mains (utility) power is restored the module has been designed to transfer the load back to the mains (utility) supply. The module then instructs the engine to begin the cool down procedure and stopping sequence (user configured).
DSE704 Specifications:
1)Configuration mode is selected by operation of a small switch on the rear,left-hand edge of the PCB.This is partially hidden to prevent accidental operation.
2)Once configuration mode is selected,the "Auto" LED will commence rapid flashing.When in configuration mode all normal operation is suspended.
3)The "Stop" pushbutton can be used to select the LED "code" that corresponds to the required function.The 5 left hand LED's will form the code.