1) alloy:8011

2) temper: Hard
3) width: ≤600 (according customer requirements)
4) Thickness: 20-30micron (before coating)

5) Classification: Unprinted, printed

6) Coating thickness options:

1 .4-6GSM with tolerance of +/-0.5GSM

2 .6-8GSM with tolerance of +/-0.5GSM standard, if not specified, heat sealing coating is 4 with a with tolerance of +/-0.5GSM , both seal strength with PVC/PVDC  8N/25mm min,

3 .primer or OP: 1 GSM

7) printing and lacquer coating: printed as per tex, layout and shade approved by customer. for non-printed specification, clear lacquer to be coated as a protective coating and good printability. Printing inks and lacquer coating are capable to with standard 180deg. C for 1 sec. dwell time.

8) structure: HSL/ALU FOIL/printing layer/OP

         HSL/printing/ alu foil/printing/OP

         HSL/printing /alu foil/OP

         HSL/ALU FOIL/ OP

         HSL/ALU FOIL/primer (printable)

9)Inner packing: core dameter:76mm, out diameter: 240-280mm Max ( as your requirements)

10) Out packing: protected by plastic bag, foam, hard carton, wooden pallets.