CIS end-suction marine centrifugal water pump
Capacity range: 4 to 400 m3/h
Head range: 5 to 150 m
Flange size range: 50 to 200 mm
Power range: 2.2 to 160 kw
Voltage: 440V, 380V and so on
Freqency: 50Hz or 60Hz
Material: Cast iron, stainless steel or bronze
Classification society:CCS, ABS, BV and so on
Head range: 5 to 150 m
Flange size range: 50 to 200 mm
Power range: 2.2 to 160 kw
Voltage: 440V, 380V and so on
Freqency: 50Hz or 60Hz
Material: Cast iron, stainless steel or bronze
Classification society:CCS, ABS, BV and so on
CIS Series horizontal end-suction centrifugal marine pump is widely used for transfer of fresh water, sea water on board ship. The pumps are applicable to fire fighting pump, cooling water pump, ballast pump, hot water circulation pump and sanitation pump.
The temperature of the media transferred should not exceed 80 degree, however, with better material and better mechanical seal, CIS pump can be used for circulation for hot water, max temperature can be 150 degree.
The pump rotates clockwise viewed from motor.
CIS marine centrifugal pump is designed according to the capability and size stipulated in the International Standard ISO2858, it is composed of pump body, pump cover, impeller, shaft, ring seal, sleeve and suspended bearing units.
The pump body and pump cover in CIS series are separated from the back of impeller, that is to say in general, back open structure, whose advantages: convenient overhaul, when checking and repairing, the pump body suction pipe, discharge pipe and motor need not to move, just disassembly the middle connector of extended coupling to quit the rotor units for overhaul.
The temperature of the media transferred should not exceed 80 degree, however, with better material and better mechanical seal, CIS pump can be used for circulation for hot water, max temperature can be 150 degree.
The pump rotates clockwise viewed from motor.
CIS marine centrifugal pump is designed according to the capability and size stipulated in the International Standard ISO2858, it is composed of pump body, pump cover, impeller, shaft, ring seal, sleeve and suspended bearing units.
The pump body and pump cover in CIS series are separated from the back of impeller, that is to say in general, back open structure, whose advantages: convenient overhaul, when checking and repairing, the pump body suction pipe, discharge pipe and motor need not to move, just disassembly the middle connector of extended coupling to quit the rotor units for overhaul.
Application scope: fresh water pump, sea water pump, marine cooling water pump, marine ballast pump, sanitary pump(hygiene pump), marine centrifugal pump
visit our web silipump.com for more information
visit our web silipump.com for more information