Equipment process:
Manual-De-coiler ---Forming machine ---welding --- flying saw cutting --- Collection table
Main technical parameters
Technical datas:
Width of material sheet: ≤1200 mm
Thickness of material sheet: 1.5mm
Material: cold steel coil
Line speed : 4 M/min
Total power: about 40.5KW
Forming product range
Board rack, Maximum thickness: 1.0~2.0 mm
Width of product: ≤1200mm
Full line is controlled by PLC control system with touch screen operation to achieve the human and PLC interactive. The operator can monitor the setting program (programmable control) and modify the parameter to control the line. Also can check the running status, parameter and error indication etc.
Full line is controlled by PLC control system with touch screen operation to achieve the human and PLC interactive. The operator can monitor the setting program (programmable control) and modify the parameter to control the line. Also can check the running status, parameter and error indication etc.
Operation type: manual /auto two type switch. In manual position: can run the each part of the machine. In auto position: can run the full line. The emergency stop ensures the safe of the equipment and operator.
Manual-De-coiler ---Forming machine ---welding --- flying saw cutting --- Collection table
Main technical parameters
Technical datas:
Width of material sheet: ≤1200 mm
Thickness of material sheet: 1.5mm
Material: cold steel coil
Line speed : 4 M/min
Total power: about 40.5KW
Forming product range
Board rack, Maximum thickness: 1.0~2.0 mm
Width of product: ≤1200mm
Full line is controlled by PLC control system with touch screen operation to achieve the human and PLC interactive. The operator can monitor the setting program (programmable control) and modify the parameter to control the line. Also can check the running status, parameter and error indication etc.
Full line is controlled by PLC control system with touch screen operation to achieve the human and PLC interactive. The operator can monitor the setting program (programmable control) and modify the parameter to control the line. Also can check the running status, parameter and error indication etc.
Operation type: manual /auto two type switch. In manual position: can run the each part of the machine. In auto position: can run the full line. The emergency stop ensures the safe of the equipment and operator.