1. Product name: Polypropylene (HDPE LDPE LLDPE PP)
2. CAS No.: 9003-07-0
3. HS Code: 3902100090
4. Appearance: Blue, black or other colors on request
5. Type: High density low density
 

6. Applications:
HDPE (high density PE) - is used in products and packaging such as milk jugs, detergent bottles, margarine tubs, garbage containers and water pipes

LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and injection molding applications. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. LDPE is particularly suitable for applications that require excellent processability and optical proterties.

PP is used agriculture, industry, bag, hospital, hygiene, etc.
 

7. Package: Packed into 25kg PP bag, 20MTS/20'FCL.
 

8. Specification:

PP				Testing method	Value
Basic property	density		Kg/m3	ASTMD 1505	905
	Melt flowing speed		g/10 mins	GB3682	29
	Tensile yield strength		Mpa	GB1040	23
	Elongation		%	GB1040	50
	Izod impact		J/m	ASTMD256	65
	hardness		R	GB9342	85
	Heat distortion temperature		° C	ASTMD648	105
Mainly used for		High impact resistant refrigerator, washing machine drum and related fittings.

 

HDPE
Property	Unit	Typical Value
Mass density	g/cm 3	0.941-0.959
Melt flow Rate(190 centidegree /2.16kg)	g/10min	≤ 1.0
Tensile yield strength	MPa	≥ 19.0
Flexural modulus	Mpa	≥ 965
Elongation@ break	%	≥ 400
Impact Embrittlement temperature	centidegree	MAX -118
Dielectric Constant	100KHZ	2.32
	1MHZ	2.31
Loss Tangent	100KHZ	MAX 0.0001
	1MHZ	MAX 0.0001
Volume resistivity	OHM-CM	MIN 1x10 15
Application	Mainly used for the production of high toughness of the telephone, cable insulation material

 

LDPE	STANDARD	STANDARD
Melt Flow Rate(g/10min) (1: 21.6kg)	0.1	9.0-13.0
Density(g/cm 3 )	0.95	0.948-0.951
Power Ash%	0.01	0.04
Tensile Strength(MPa)	22	23
Elongation At Break%	600	600
Environmental stress-cracking	1500	1500