If you live in State that allows back-metering than you can maximize your benefits. For those residents of states with back-metering you can supplement your electric needs and get a credit or check from electric company.
If you live in a state that does not allow back-metering,you can still benefit by supplementing your supplementing your electric use and lowering your electric.
Feature:
- Generates pure Sine Wave
- Automatic power adjustment
- Constant Power Output
- Low distortion output on all ranges
- Allow different Power factor from loads
- Compact and light weight design
- Maximum Power Point Tracking (MPPT) - optimize power output
- Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring
- Stackable (connect in parallel for higher output)
- Aluminum enclosure will act as heat sink to help dissipate heat
- Simple and safe installation
- Island protection: Inverter will shut down during black outs.
- Grid-Tied - sell green power directly back to the grid at a premium rate
(depends on your location)
- Generates pure Sine Wave
- Automatic power adjustment
- Constant Power Output
- Low distortion output on all ranges
- Allow different Power factor from loads
- Compact and light weight design
- Maximum Power Point Tracking (MPPT) - optimize power output
- Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring
- Stackable (connect in parallel for higher output)
- Aluminum enclosure will act as heat sink to help dissipate heat
- Simple and safe installation
- Island protection: Inverter will shut down during black outs.
- Grid-Tied - sell green power directly back to the grid at a premium rate
(depends on your location)
Specification:
|
Grid-inverter Type
|
YTP-800
|
|
Recommended Maximum PV Power
|
Ppv=1040Wp
|
|
DC Maximum Input Power
|
PDC.max=880W
|
|
DC Maximum Voltage
|
VpvDC28VDC
|
|
PV MPPT DC Voltage Range
|
Vpv 10.5V~28DC
|
|
Peak Inverter Efficiency
|
ηmax>94%
|
|
Power Factor
|
0.93-0.99
|
|
PV Maximum Input Current
|
Ipv.max50A
|
|
Reverse Polarity Protectio
|
Fuse
|
|
AC Rating Output Power
|
750W AC
|
|
AC Maximum Output Power
|
800W AC
|
|
AC Normal Voltage Range
|
80V-130;160~260VAC
|
|
AC Frequency
|
45-65Hz
|
|
Inverter Output Current Total Harmonic Distortion
|
THDIAC <5%
|
|
Phaseshift
|
<1%
|
|
Island Effect Protection
|
inverter shuts down during black out
|
|
Output waveform
|
Pure Sine Wave
|
|
Inverter Output Shorting Protection
|
Current Limiting
|
|
Standby Power Consumption
|
<8W
|
|
Nighttime Power Consumption
|
<1W
|
|
Ambient Temperature Range
|
-20 ℃~65℃
|
|
Cooling
|
Convection cooled with fan
|
|
Ambient Humidity
|
0~100%(Indoor Type Design)
|
|
Eelectromagnetic Compatibility
|
EN50081.part1 EN50082.part1
|
|
Power Network Disturbance
|
EN61000-3-2
|
|
Power Network Detection
|
DIN VDE 126
|
|
Display
|
1 Red and 1 Green LED
|
|
Packing dimension(L*W*H)
|
430x255x155mm
|
|
gross weight (kg)
|
3.5KG
|
Note:
- Install in a low humidity and well-ventilated area. Remove All flammable objects.
- Connect the inverter to a wall socket with the supplied AC Power Cord
-
Connect the Solar Panel, Battery or Wind Turbine's DC Supply cables to the DC input
Terminal of the inverter. Wind Turbine installations will require respective charge
Controllers and dump loads
In order to achieve higher power use requirements,the use of this product can be stacked,such as:4 grid inverter 1000w of stack used is equal to 4000W,and the number of open stacks.
We have confidence to be your best business partner in CHINA.All inquiries will be replied with in 24 hours.Welcome to send us inquiry for more details.