K LARGE SPAN MACHINE
240 roll forming machine
240 roll forming machine
|
TYPE
|
Width of the coil
|
Width of the formed sheet
|
The depth of the groove
|
Thickness of the coil
|
Proper span
|
|
305(120)
|
600
|
305
|
140
|
0.6-1.3
|
≤18m
|
|
580
|
914
|
580
|
230
|
0.6-1.5
|
≤38m
|
|
610(240)
|
914
|
610
|
203
|
0.6-1.5
|
≤33m
|
|
650
|
914
|
650
|
181
|
0.6-1.3
|
≤24m
|
|
700
|
914
|
700
|
123
|
0.6-1.3
|
≤18m
|
|
750 I
|
914
|
750
|
86
|
0.6-1.3
|
≤12m
|
|
750
|
1000
|
750
|
138
|
0.6-1.3
|
≤20m
|
|
800
|
1000
|
800
|
114
|
0.6-1.3
|
≤12m
|
Introduction of 610(mic 240)
* Main Technical Specification
- Size: 8900mm × 2250mm × 2300mm
- Total Weight: about 11000KG
- Main forming unit driving motor power: 7.5kW
- Curving motor power: 4+1.1+1.1 kW
- Electric cutting motor power: 3kW
- Material of rollers: 45# steel, quenched HRC 58-62
- Material of roller shafts: 45# steel, adjusted
- Material of cutting blade: Cr12
- Step of rollers: 13 steps
- Forming speed: 10000~12000 mm/min
- Max. span: 40m
* Features of our k-span machine
1) All the rollers are forged from the high quality structural steel and are processed intensely. The surfaces of the rollers are plated with hard chromium. The rollers have a high hardness and long operating life.
2) The power set to automatically transport the colored steel sheet is equipped in the forming press section, which can press the colored steel sheet with the thickness of 0.5~1.5mm. It is not needed to frequently adjust the clearance between the pressing rolls when pressing the sheet with different thickness, which can make the sheet come out from machine normally without scuffing of the coating film of the sheet. Being just like a foolproof camera, the operation of the machine is very simple. But the quality of the finished product can be guaranteed.
3) The length of the finished sheet is measured by the electronic measurement instrument or mechanical measurement instrument. The helping hand wheel and the counter are used in the adjustment of the bending of arch sheet, which makes the operation simple and guarantees the quality and the dimensional precision.
4) The hoisting tool is light and handy (The weight of hoisting tool of the United States is 30KG. And the weight of hoisting tool of our company is 2KG). It is convenient to install and uninstall the hoisting tool. Its hoisting speed is quick.
3) The length of the finished sheet is measured by the electronic measurement instrument or mechanical measurement instrument. The helping hand wheel and the counter are used in the adjustment of the bending of arch sheet, which makes the operation simple and guarantees the quality and the dimensional precision.
4) The hoisting tool is light and handy (The weight of hoisting tool of the United States is 30KG. And the weight of hoisting tool of our company is 2KG). It is convenient to install and uninstall the hoisting tool. Its hoisting speed is quick.
The joining type of the roof is self-lock, which makes it easy to install and safe with excellent water proof and storm resistance. The curving roof can directly be produced on worksite, effectively lowering the cost. The product is widely used on large-scale and mid-scale industrial construction, such as factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre and so on.