100 - 400 mesh Stainless steel printing wire mesh

1. Specifications of the stainless steel screen printing mesh

 

Material: Stainless steel 304, 316, 316L wire gauze

Mesh/inch: 300

Wire Diameter: 30 micron

Open area: 38.0%

Aperture: 55 micron

Thickness: 66-68 micron

Claendered Thickness: 40-59 micron

Theoretical Ink: 28.0 cm3/m2

Weave Style: Plain weave screen printing mesh.

Plain weave pattern means that the wires in warp direction are equally displayed, and the wire in weft direction pass through them, and with heald frame reciprocating the wires in warp direction aslo moving from top to bottom and next to the contrary direction, and then the wire in weft direction go through them. And the weft wires shuttling and finally each wire be pressed by one wire and at the same time presses another wire.

 

2. Feaures of the silk screen printing mesh

 

 a. anti-acid, anti-alkali stainless steel wire screen printing mesh

 b. high tension, low elongation micron silk screen

 c. anti-corrosion, anti-abrasion screen mesh for printing

 d. good permeability and super pricision paper making screen printing mesh

 e. high flexibility at extreme tension and anti-static property which ensured the safety of printing

 f.  special ink printing performance such as good solvent resistant and heat-melting resistant properties, and non-fusibility, and etc.

3. Applications about the stainless steel screen printing mesh

 

Applications: The stainless steel screen printing wire mesh is extensively used in the Printing Industry, such as the printing of chip electrical components, solar battery, glass, ceramic, and Fission-Product Detection, and the printing of Liquid Crystle Display, and Printed Circuit Board and so on.