PC-08 series Powder Coating Machine uses the static to spray the plastic powder material onto the welding seam of can body.Then the plastic powder material is melted down by the heat from the curing oven to form a anti-corrosive film to cover the welding seam to protect the welding seam from being corroded.
Main Feature:
1. The Powder supply is controlled automatically,the machine will alarm and stop automatically when powder used up.
2. Powder is available to be vacuum callback and recycled.
3. The highly auti-abraded and anti-static quality material is adopted to the machine, and the static pressure can be controlled automatically.
Technical Paremeter:
| Transfer speed | 10-70m/min. |
| Production capacity | 600cans/min. |
| Coating width | 8-12mm |
| Applicable can diameter | 52-280mm |
| Powder material | Polyester,Epoxies |
| Comperessed air | 0.4mpa,0.5m3/min. relative temperature<60% |
| Input power | AC220V,50HZ,single phase. |
| Power |
2.5KW
|
Remarks: inside liquid spraying coating machine(with Nordson pump) available.