Product features :
It is colorless transparent oily liquid, with slight odor. It is insoluble in water, soluble i organic solvents such as chloroform, gasoline, ethyl acetate, methanol, toluene, mineral oil and vegetable oil, etc, and slightly soluble in ethylene glycol.
Use:
This product is typical cold resistant plasticizer for polyvinyl chloride, vinyl chloride, polystyrene, cellulose nitrate, ethyl cellulose and synthetic rubber, with high plasticising efficiency, low thermal discoloring property, capable to edow products with high low-temperature softness and light resistance. During processing, this product will show good lubricating property, and endow products with good touch feeling. It is usually used in cold resistant argricultural film, wire, cable covering, artificial leather, plate, outdoor water pipes and so on together with universal plasticizer such as DOP and DBP. When used to plasticize paste, it will endow the paste with low initial viscosity and high stability.
Technical index:
It is colorless transparent oily liquid, with slight odor. It is insoluble in water, soluble i organic solvents such as chloroform, gasoline, ethyl acetate, methanol, toluene, mineral oil and vegetable oil, etc, and slightly soluble in ethylene glycol.
Use:
This product is typical cold resistant plasticizer for polyvinyl chloride, vinyl chloride, polystyrene, cellulose nitrate, ethyl cellulose and synthetic rubber, with high plasticising efficiency, low thermal discoloring property, capable to edow products with high low-temperature softness and light resistance. During processing, this product will show good lubricating property, and endow products with good touch feeling. It is usually used in cold resistant argricultural film, wire, cable covering, artificial leather, plate, outdoor water pipes and so on together with universal plasticizer such as DOP and DBP. When used to plasticize paste, it will endow the paste with low initial viscosity and high stability.
Technical index:
|
Item
|
Best quality
|
Grade A
|
|
Colourity (Pt-Co)≤
|
50
|
100
|
|
Ester % ≥
|
99.0
|
99.0
|
|
Density (ρ20οC)g/cm3
|
0.927±0.003
|
|
|
Acidity (base on adipinic acid) %≤
|
0.020
|
0.030
|
|
Flash point οC ≥
|
190
|
186
|
|
Loss on heating % ≤
|
0.25
|
0.30
|