High purity alumina reflector, lamp housing and heat sink; high-strength tempered glass, high power LED light source, efficient imported constant current source.
Item No.: AL-SL002DX150
Size: 764*357*158mm
Input Voltage: AC(85V~265V)
Power Factor: >0.95
Output Voltage: 30V~36V
Power Consumption: 156W
LED Luminous Efficiency: 60~100 Lm/W
LEDInitial Flux: WW 11000Lm PW 12000Lm CW 11600Lm
Color Temperature: WW 2700K~7000K PW 3900K~6000K CW 6000K~7000K
Light Distribution: Batwing-shaped/Rectangle
Ingress Protection: IP65
Life Span: 50,000Hrs
Application:
Streets, roads, highways, bridges, pavements, squares, campus, parks, yards, residential area, factories, harbour, dock, etc.
Size: 764*357*158mm
Input Voltage: AC(85V~265V)
Power Factor: >0.95
Output Voltage: 30V~36V
Power Consumption: 156W
LED Luminous Efficiency: 60~100 Lm/W
LEDInitial Flux: WW 11000Lm PW 12000Lm CW 11600Lm
Color Temperature: WW 2700K~7000K PW 3900K~6000K CW 6000K~7000K
Light Distribution: Batwing-shaped/Rectangle
Ingress Protection: IP65
Life Span: 50,000Hrs
Application:
Streets, roads, highways, bridges, pavements, squares, campus, parks, yards, residential area, factories, harbour, dock, etc.
Features:
Uses single powerful LED(30W100W) as the light source, using our proprietary LED encapsulation.
Utilizes the special design of multichip single module. Imported high brightness semiconductor chips.
Integrative design for heat sink and housing; The LED is closely connected to the surface. The heat from LED is removed through the heat dissipation wing and also by the air ventilation. The design ensures a 50,000 hours life-span for the LED. If it works 12 hours per day, it can work over 10 years.
The maintenance charges are much lower than other street lights.
The die-casting aluminium alloy housing is effective in waterproofing and dust prevention. It also helps in removing the heat properly. The surface of the light is specially treated, so it is able to bear an ultraviolet ray and resist to corrosion. The whole light meets the standard of IP65.
Uses monomer ellipse reflector with spheroid cambered surface so it can control the LED light pertinently in a needed area. This special design can improve the uniformity of the light and the utility ratio of the energy used.
Compared with traditional sodium lights, it can save electricity more than 60%.
No ill glare; no abrupt and frequent flashes. The design ensures that ill glare is eliminated, vision fatigue and disturbance aroused by traditional streetlight and also can improves the safety of the driving.
No delay start; no waiting. It can reach its normal brightness as soon as it is turned on, avoiding the long time start process of traditional lights.
Environment friendly. No lead, mercury, and any other contamination.
Excellent partner of the Solar panel system. It can exert many merits such as working with direct current and lower voltage. It is power saving and environment friendly. The connection of the solar panel and LED light sources provide high reliability.
Uses single powerful LED(30W100W) as the light source, using our proprietary LED encapsulation.
Utilizes the special design of multichip single module. Imported high brightness semiconductor chips.
Integrative design for heat sink and housing; The LED is closely connected to the surface. The heat from LED is removed through the heat dissipation wing and also by the air ventilation. The design ensures a 50,000 hours life-span for the LED. If it works 12 hours per day, it can work over 10 years.
The maintenance charges are much lower than other street lights.
The die-casting aluminium alloy housing is effective in waterproofing and dust prevention. It also helps in removing the heat properly. The surface of the light is specially treated, so it is able to bear an ultraviolet ray and resist to corrosion. The whole light meets the standard of IP65.
Uses monomer ellipse reflector with spheroid cambered surface so it can control the LED light pertinently in a needed area. This special design can improve the uniformity of the light and the utility ratio of the energy used.
Compared with traditional sodium lights, it can save electricity more than 60%.
No ill glare; no abrupt and frequent flashes. The design ensures that ill glare is eliminated, vision fatigue and disturbance aroused by traditional streetlight and also can improves the safety of the driving.
No delay start; no waiting. It can reach its normal brightness as soon as it is turned on, avoiding the long time start process of traditional lights.
Environment friendly. No lead, mercury, and any other contamination.
Excellent partner of the Solar panel system. It can exert many merits such as working with direct current and lower voltage. It is power saving and environment friendly. The connection of the solar panel and LED light sources provide high reliability.