Introduction to the High Pressure Suspension Mill:
High Pressure Suspension mill is mainly made up of the mainframe, separator, blower, finished powder cyclone collector, bag filter and connecting pipes, etc.
According to users’ need, the mill can also be equipped with accessory equipments like crusher, bucket elevators, hopper, electromagnetic vibrating feeder and switch box, etc.
The purpose of the High Pressure Mill is to grind materials in the fields of building materials, mining, metallurgies and chemical industry. The materials should be non-flammable and non-explosive. Examples of the materials are: quartz, feldspar, barite, fluorite, dolomite, garnet, carborundum, bauxite, zircon, marble, calcite, iron ore, rock phosphate, slag, ceram, gold mine and coal slack and so on(400 kinds of materials). The materials should have the hardness less than 9.3 in Moh’ s scale and humidity less than 6 percent. The granularity of the end products can be changed from 30 to 425 meshes.
Working Principle of High Pressure Suspension Mill:
When entering grinding chamber, the raw materials are shoveled up by the shovels and grinded between the rollers and ring; the materials after grinding are brought into the separator along with the air from the blower, and the qualified fine powder became final products and come into the cyclone powder collector, the other unqualified powder fall down to be re-grinded. The circular air returns back to the blower that the above process will be repeated, and the remaining air enters the bag filter in order to protect the environment.
Characteristics:
1. Compared with other mills, its capacity increases by 10%-20% under the same power condition, and compression force of rollers to material improve 800-1200kgf under the force of high-pressure spring.
2. Size of final product can be 0.613mm (30mesh) – 0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh).
3. High Pressure Suspension Mill meets the requirement of national dust-dump standard.
4. The separator can be adjusted very easily. 5. The multi-class seals are adopted to keep the grinding equipment tightly closed.
Technical data:
High Pressure Suspension mill is mainly made up of the mainframe, separator, blower, finished powder cyclone collector, bag filter and connecting pipes, etc.
According to users’ need, the mill can also be equipped with accessory equipments like crusher, bucket elevators, hopper, electromagnetic vibrating feeder and switch box, etc.
The purpose of the High Pressure Mill is to grind materials in the fields of building materials, mining, metallurgies and chemical industry. The materials should be non-flammable and non-explosive. Examples of the materials are: quartz, feldspar, barite, fluorite, dolomite, garnet, carborundum, bauxite, zircon, marble, calcite, iron ore, rock phosphate, slag, ceram, gold mine and coal slack and so on(400 kinds of materials). The materials should have the hardness less than 9.3 in Moh’ s scale and humidity less than 6 percent. The granularity of the end products can be changed from 30 to 425 meshes.
Working Principle of High Pressure Suspension Mill:
When entering grinding chamber, the raw materials are shoveled up by the shovels and grinded between the rollers and ring; the materials after grinding are brought into the separator along with the air from the blower, and the qualified fine powder became final products and come into the cyclone powder collector, the other unqualified powder fall down to be re-grinded. The circular air returns back to the blower that the above process will be repeated, and the remaining air enters the bag filter in order to protect the environment.
Characteristics:
1. Compared with other mills, its capacity increases by 10%-20% under the same power condition, and compression force of rollers to material improve 800-1200kgf under the force of high-pressure spring.
2. Size of final product can be 0.613mm (30mesh) – 0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh).
3. High Pressure Suspension Mill meets the requirement of national dust-dump standard.
4. The separator can be adjusted very easily. 5. The multi-class seals are adopted to keep the grinding equipment tightly closed.
Technical data:
| Model | Piece of roller |
Size of the roller (mm) |
Size of the ring (mm) |
Feed size(mm) |
Fineness of powder (mm) |
Capacity (t/h) |
Motor power (kW) |
Weight ( without motor)(t) |
| YGM65 | 3 | Φ 210× 150 | Φ 650× 150 | ≤ 15 | 0.033-0.613 | 0.4-1.8 | 15 | 3.6 |
| YGM75 | 3 | Φ 260× 150 | Φ 780× 150 | ≤ 15 | 0.033-0.613 | 1-3 | 18.5 | 4.8 |
| YGM85 | 3 | Φ 270× 150 | Φ 830× 150 | ≤ 20 | 0.033-0.613 | 1.2-4 | 22 | 8 |
| YGM95 | 4 | Φ 310× 170 | Φ 950× 170 | ≤ 25 | 0.033-0.613 | 2.1-5.6 | 37 | 14 |
| YGM130 | 5 | Φ 410× 210 | Φ 1280× 210 | ≤ 30 | 0.033-0.613 | 2.5-9.5 | 75 | 24 |