1) Introduction to the Single stage Hamer Crusher:

Hammer Crusher is widely used for medium or fine crushing for medium hard and brittle materials by departments of mine, cement, coal, building material, metallurgy, chemical industry, road construction, gas chemical industry and thermal power generation, etc. Coal gangue, coke, slag, limestone, phosphate rock, salt, whiting, gypsum stains, alum, brick and tile, etc. can be crushed by this equipment. The compression strength of the materials shall not exceed 100MPa, while the moisture content shall be lower than 15%. The equipment can be also used for crushing chips and paper with fiber structure and strong elasticity and ductility, or recycling asbestos fiber by crushing wastes of asbestos cement, etc. Gap between the gratings are adjustable to change grain size of the discharge, so as to meet different requirements of the customers.

2) Main Purpose :

This series of products applicable to the crushing strength of not more than 200 Mpa of limestone, gypsum, coal, marl, sand shale, with broken than large, uniform product size, structure simple, reliable, easy maintenance, operating costs and economic characteristics, widly used in the cement industry.

Main Technical Parameters ofHammer crusher:

Model	Max feed size(mm)	Rotor diameter mm	Rotor Length mm	Residual on the  screen ≤15%	output  (t/h)	Power(kw)	Weight (t) ( not include  motor)
PCF-1412	600×600×900	1420	1200	≤25	80-120	220	23.5
PCF-1616	800×800×1000	1650	1630	≤25	180-220	315-355	43.3
PCF-1616 Ⅱ
PCF-1618	≤ 1m 3	1650	1830	≤25	240-280	400	49.5
PCF-1818	900×900×1000	1850	1830	≤25	300-350	560	70
PCF-2018	<1m 3	2020	1802	≤25	350-500	630-710	89
PCF-2018 Ⅱ	1000×1000×1000			≤25-75	350-450	630-700
PCF-2022	1000×1000×1500	2010	2230	≤30~90%	600-800	800	111
PCF-2022 Ⅱ	1000×1000×1500	2010	2230	≤70~90%	600-800	800	130
PCF-2022 Ⅲ	1000×1000×1500			≤80~90%	700-800	800
2PCF-1818	1000×1200×1500	1850	1830	≤75	1000	560	119
2PCF-2030	1000×1000×1500	2020	2230	≤25	700-900	800×2	142