Paper cup-making machine
automatic, ultrosonicused for two-side coated paper
economic, steady, safty
easy operation
competitive price good quality
Main specifications:
Micro-controlled transducer,
Automatic control adopts optically controlled non contact switch,
Automatic cup-fan-wall body feeding, sealing,
Automatic cup bottom feeding, punching, edge curling, knurling,
Automatic cup top edge curling, Automatic cups counter,
Micro-controlled transducer,
Automatic control adopts optically controlled non contact switch,
Automatic cup-fan-wall body feeding, sealing,
Automatic cup bottom feeding, punching, edge curling, knurling,
Automatic cup top edge curling, Automatic cups counter,
Other specifications,
Paper cups body side sealing by ultrasonic,
Paper cups bottom sealing by hot air station,
Full automatic,
Easy change molds produce different cups (demand the cups with the same bottom diameter, the same coning)
Easy operating by operator,
Easy maintenance with minimum cost,
Cheap operating cost and low investment,
Additional equipments needed for this cup machine. (air compressor),
Two-side PE coated paper cups use for hot drinks and cold drinks and other special use, examples: Hot water cups, Hot coffee cups, Beverage cups, Coke cups, Ice-cream cups, coca-cola cups, Cold drink cups etc.
Paper cups body side sealing by ultrasonic,
Paper cups bottom sealing by hot air station,
Full automatic,
Easy change molds produce different cups (demand the cups with the same bottom diameter, the same coning)
Easy operating by operator,
Easy maintenance with minimum cost,
Cheap operating cost and low investment,
Additional equipments needed for this cup machine. (air compressor),
Two-side PE coated paper cups use for hot drinks and cold drinks and other special use, examples: Hot water cups, Hot coffee cups, Beverage cups, Coke cups, Ice-cream cups, coca-cola cups, Cold drink cups etc.
Main technical data of ZB-16A paper cup making machine
|
Paper Cup Size[Capacity] :
|
4~~16 OZ (Change molds produce different cups' size)
|
|
Paper cup top diameter:
|
Min 45mm ~~Max 85mm
|
|
Paper cup bottom diameter:
|
Min 35mm~~Max 62mm
|
|
Paper cup height:
|
Min 35mm~~Max 125mm
|
|
Paper weight :
|
180~~350gsm (g per meter) (Recommend 220~~ 280gsm)
|
|
Paper material:
|
Two-side PE coated Paper
|
|
Speed of making paper cups:
|
35~~40 pcs per minute
|
|
Limited of temperature:
|
0~~400 degree
|
|
Electric heater power:
|
2.55kw
|
|
Main motor power:
|
1.5kw
|
|
Rolling motor power:
|
0.55kw
|
|
Power source :
|
380V 50Hz or 220V 50Hz or other suitable for your power
|
|
Whole machine weight:
|
1550kg
|
|
Appreance size: (long-width-height):
|
2650x1200x1550mm
|
|
Package box size: (long-width-height):
|
2700x1400x1900mm
|
Working principles / procedures:
1. Square paper pieces be printed(use offset printer)and cut(use die-cutting machine)in advance, becomes cup-fan-wall-papers to make cup body.
2. Paper sender delivers the cup-fan-wall-papers to molds, sealing the body .
3. The cup bottom paper (reel) automatic feed to the bottom cut parts, be cut into round pieces and sent to molds with the sealed cup body.
4. Pre heating the cup bottom, bottom heating, curlinging the top edge .
5. Sealing the bottom with body.
6. Knurling the cup bottom.
7. Discharging finished cups automatically from molds. Sending to collector and be collected and piled and counted automatically.
1. Square paper pieces be printed(use offset printer)and cut(use die-cutting machine)in advance, becomes cup-fan-wall-papers to make cup body.
2. Paper sender delivers the cup-fan-wall-papers to molds, sealing the body .
3. The cup bottom paper (reel) automatic feed to the bottom cut parts, be cut into round pieces and sent to molds with the sealed cup body.
4. Pre heating the cup bottom, bottom heating, curlinging the top edge .
5. Sealing the bottom with body.
6. Knurling the cup bottom.
7. Discharging finished cups automatically from molds. Sending to collector and be collected and piled and counted automatically.