Detailed Product Description

The ECU must be removed from the car and is programmed by special spring contacts without soldering on the circuit board

The ECU must be removed from the car and is programmed by special spring contacts without soldering on the circuit board.
This method is used for example if a car has no connection from the OBD connector to the ECU or for very new ECU versions.
The best tool for this is the BDM 100

The BDM100 connects these solder pads of the BDM port with the WinOLS PC over the USB bus. The BDM100 gets its operating
voltage from the USB bus. The ECU needs its own supply voltage of +12 volts.
 
The BDM100 is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to
read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).

The BDM100 requires the ECU to be open, "on the bench", as the reading/programming operations are realized by linking a
flat cable to specific area the ECU (the tool, on the other side, is linked to the USB port of a computer).

It allows also to create perfect copies of the whole software of an ECU (after having read the original ECU software).

The software allows to read and program the WHOLE ECU content of:
29BL802 SSOP eprom file (or ROM memory with maps if eprom physically not present);
MOTOROLAA MPC5xx Processor file;
Serial Eprom content.