HB-40W HB40W HB 40W Electric Soldering Iron
This is the special T-Iron for replacing BMW pixel cable. Pixel repair (flat cable) is to replace the digital panel, which is within the instrument panel. It is glued with a soldering iron with a tip (T) with the teflon base not to burn the flat cable, . is taken from the old flat cable and sticks to the new with the soldering iron with teflon base. Note: Remember to remove the paper that comes dressed in new flat cable
How to solder
- Clean the parts to be joined.
- Clean soldering iron cover and "tin" all faces of tip with a coating of solder.
- Heat parts (not solder) to be joined.
- Apply flux-core solder to heated parts, not the soldering cover, and heat it till solder melts and flows freely.
Caution
- A smoke will be normally come out for a short while at initial use.
- Use with soldering stand to avoid any part of body get burnt.
- Don't pull the cover away when soldering iron still hot otherwise heating element may be burnt out.
- Cool down naturally after use.