Sublimation Ink for Offset Press
One set with 4 colors
1. A professional manufacturing plant
One set with 4 colors
1. A professional manufacturing plant
2. With quick drying speed and bright color
3. Passed SGS REACH DGM MSDS
4. Easy to operate, apply to any offset press
3. Passed SGS REACH DGM MSDS
4. Easy to operate, apply to any offset press
5. High quality with competitive price
6. Ink granula is 4um
7. Good stability, restore points clear
8. 400 sq. M can be printed with 1kg ink (400 sq. M = 1 kg ink)
Such kind of thermal transfer ink is used on offset machine, if you want to print a perfect image, you just need only 3 steps:
1. Put the image on paper, normal paper is ok.
2. Put the printed paper on substrates, such as polyester and nylon fabric.
3. Put the paper and substrate on the heat transfer machine. When temperature reach 180-220 degrees, the image will be transfered from the paper onto substrate.
1. Use scope: Applicable to single-color, two-color and multi-color offset printing machine which supply single paper once. Print materials as follows: coated paper, offset paper, cardboard.
2. Product Characteristics: Good ink balance, restore points clear, fast fixation, good stability on the machine.
3. Pattern: P506-CD
4. Use Method: Under normal condition, directly to use on the machine.
5. Attention: Because of temperature, paper, print speed and other factors, may adjust the use method as following rules:
a)To speed up the drying, can add mixed desiccant, the dosage is 0-2%.
B)With specialized dilute pellicle.
C)To adjust liquidity, can add 6# printing varnish, the dosage is 0-5%.
D)To reduce the glutinosity and keep liquidity unchanged, can add viscosity reducer.
E)To reduce the glutinosity and liquidity, can add 52-94, the dosage is 0-5%.
6. Often we produce the samples before use. If little deviation, then determine the final product to be printed. Because sublimation offset ink is used for gas shading, the printing ratio should not be printed by ordinary plate-making.
7. (1)If print red PS-plate, the proportion is 100% magenta and 35%-40% yellow. If print blue PS-plate, the proportion is 100% cyan and 20% magenta more or less. If print green PS-plate, the proportion is 80% cyan and 90% yellow. (2)If print Asian-yellow PS-plate, the proportion is 10-12% magenta and 7-8% yellow and a little cyan.
8. The required temperature list in using offset ink (for reference)
|
Fabric Name
|
Transfer Temperature
|
Pressure
|
Time
|
|
Polyester Fabric
|
205° C~220° C
|
0.5kg/cm2
|
10~30s
|
|
Polyester low flexibility Fabric
|
195° C~205° C
|
0.5kg/cm2
|
30s
|
|
Three-acetate fiber fabric
|
190° C~200° C
|
0.5kg/cm2
|
30~40s
|
|
Nylon Fabric
|
195° C~205° C
|
0.5kg/cm2
|
30~40s
|
|
Acrylic Fabric
|
200° C~210° C
|
0.5kg/cm2
|
30s
|
|
Two-acetate Fabric
|
185° C
|
0.5kg/cm2
|
15~20s
|
|
Gather propionitrile Fabric
|
190° C~220° C
|
0.5kg/cm2
|
10~15s
|
9. Strong degree of staining
|
Sun
|
Red
|
Yellow
|
Blue
|
Black
|
|
5-6
|
6
|
4
|
4
|
10. For alumina plate, stainless steel, copper and porcelain by the coating, the thermal transfer temperature can refer to the temperature of polyester fabric.
11. Packing: 1-2kg/tin
12. Quality Guarantee: 3 year