Key words: AVR JTAGICE , AVR ISP
This AVR JTAG ICE + AVRISP ISP programmer 2in1 provides the users a highly-flexible, low-cost Atmel AVR design and debug tool. It's operated by AVR Studio development software. When it in JATG ICE mode, it's recognized as standard AVR JTAG ICE. When it in ISP programmer mode, it's recognized as AVRISP/STK500 ISP programmer. The AVR ISP programming supports all AVR devices. The unit is compatible with original AVR JTAG ICE and STK500/AVRISP downloader. The AVR Studio software can be downloaded from Atmel's website.
AVR JTAG ICE allows access to all the powerful features of the AVR microcontroller. All AVR resources can be monitored when debugging the firmware: Flash memory, EEPROM memory, SRAM memory, Register File, Program Counter, Fuse and Lock Bits, and all I/O modules. AVR-JTAG also offers extensive On-chip Debug support for break conditions, including break on change of Program memory flow, Program memory Break Points on single address or address range, and Data memory Break Points on single address or address range.
AVR ISP feature allows user for programming almost all AVR devices in system.
Features:
- Works with Atmel AVR Studio 4 IDE software. Recognized as STK500/ISP and JTAG ICE devices.
- JTAG ICE allow user to debug the firmware which is running in the target chip. User is able to step through the C or Assembly source code line by line in the AVR Studio. Because it is not a software simulation debugger, so that debug the in-circuit firmware become handy via JTAG interface.
- Both USB and RS232 can be used, when use USB, you need to setup driver. And when use rs232 external power is needed DC 7~9 v , in the center is VCC.
- 4 kinds of Protection circuits can ward the Programmer & Emulator and your board out of be damage.
- The JTAG ICE or AVR ISP can be Automatic Identification , so you need not use squid cable for switch, just place the cable to your 10 PIN JTAG or ISP interface smoothly.
- 2 in 1 feature gives use a flexibility and convenience when doing development.
Supported ISP Device:
The following devices are supported, (1)All low voltage versions of the devices in this column are also supported.
Classic
Tiny
Mega (1)
Other
AT90S1200
AT90S2313
AT90S/LS2323
AT90S/LS2343
AT90S/LS2333
AT90S4414
AT90S/LS4433
AT90S/LS4434
AT90S8515
AT90S/LS8535
ATtiny12
ATtiny13
ATtiny15
ATtiny22
ATtiny2313
ATtiny24
ATtiny25
ATtiny26
ATtiny261
ATtiny44
ATtiny45
ATtiny461
ATtiny48
ATtiny84
ATtiny85
ATtiny861
ATtiny88
ATtiny167
ATmega8
ATmega16
ATmega32
ATmega48
ATmega48P
ATmega64
ATmega88
ATmega88P
ATmega103
ATmega128
ATmega1280
ATmega1281
ATmega1284P
ATmega16HVA
ATmega161
ATmega162
ATmega163
ATmega164P
ATmega165
ATmega165P
ATmega168
ATmega168P
ATmega169
ATmega169P
ATmega323
ATmega324P
ATmega325
ATmega325P
ATmega328P
ATmega329
ATmega329P
ATmega644P
ATmega645
ATmega649
ATmega2560
ATmega2561
ATmega3250
ATmega3250P
ATmega3290
ATmega3290P
ATmega6450
ATmega6490
ATmega8515
ATmega8535
ATmega32C1
ATmega32M1
ATmega32U4
ATmega32HVB
ATmega43U
AT86RF401
AT89S51
AT89S52
AT90CAN32
AT90CAN64
AT90CAN128
AT90PWM2
AT90PWM2B
AT90PWM3
AT90PWM3B
AT90USB82
AT90USB162
AT90USB646
AT90USB647
AT90USB1286
AT90USB1287
Supported JTAG ICE devices:
AT90CAN128, ATmega128, ATmega128L, ATmega16, ATmega162, ATmega162V, ATmega165, ATmega165V, ATmega169, ATmega169V, ATmega16L, ATmega32, ATmega323, ATmega323L, ATmega32L, ATmega64, ATmega64L
The package includes:
- One 2-in-1 Programmer/ICE with latest firmware
- One USB Cable
- One USB driver/Software CD with user guide