Product Main

Specifications

key words: evaluation board, AVR boards, ATMEL kits, ATmega16L-8PU, ATmega16-16PU, ATmega16A-PU

Introduction:

EasyAVR M16 SK is a system produce by AVRVi for AVR study and product development, Rich in resources, JTAGICE emulator and ISP downloader on board, it's a perfect tool for your AVR mcu study.

EasyAVR M16 SK User guide : EasyAVR-atmega16-SK -user-guide.pdf ATmega16 ATmega32 development board kit

What's on the board:

1. 5V power supply interface, input 7~9V with inside positive
2. On-board AVR JTAG ICE USB interface
3. On-board AVR ISP USB interface
4. Atmega16 chip, rich on-chip resource
5. USB1.1 communication interface
6. RS232 serial communication interface
7. RS485 communication interface
8. 8 separate keys
9. 4in1 7-segment LED display drived by HC595
10. 8 separate LED
11. 1 active buzzer, also can be accessed by passive buzzer
12. Real-time clock PCF8563

13. 1 IIC bus EEPROM AT24c01
14. 1-wire single bus
15. Crystal oscillator and reset circuit
16. Optional active crystal oscillator circuit
17. AD voltage adjustment potentiometer
18. Potentiometer voltage reference and voltage under test adjust
19. 4 8-bit DIP switch
20. 32Pin MCU pins marking all the external terminal
21. 12864 LCD Interface
22. 1602 LCD Interface
23. Standard nylon terminal block KF396

24. Transparent non-slip silicone pad

Features:

The following key features have been implemented:

  • JTAG ISP 2in1 On-board, you need not use other JTAG or ISP tool.
  • ATmega16 onboard
    • ATmega16A Features:
    • High-performance, Low-power AVR 8-bit Microcontroller
    • 131 Powerful Instructions
    • 32 x 8 General Purpose Working Register
    • Fully Static Operatio
    • Up to 16 MIPS Throughput at 16 MHz
    • On-chip 2-cycle Multiplie
    • 16K Bytes of In-System Self-rogrammable Flash program memory
    • 512 Bytes EEPROM
    • 1K Byte Internal SRAM
  • 8 LEDs and a 7 segment led on-board
  • 2 RS-232 and RS485 communication port
  • IIC E2PROM AT24C01
  • LMV358 Signal conditioning circuit
  • PCF8563 real time chip
  • 1 Beeper
  • LCD12864/1602/12232 connector

English user guid Contents

	EasyAVR M16 SK 3in1 instruction	1
1. Product introduction	4
1.1 Introduction	4
1.2 Significant features	4
1.3 On-board resource list	4
1.4 System requirements	5
2. System self-test	5
2.1 Check up list of articles	5
2.2 Quick Start	5
2.3 System self-test process	6
3. Configuration DIP switches and jumpers	8
4. Driver Install	11
5. Software Install	12
5.1 Install ICCAVR	12
5.2 Install AVRstudio	13
6. Use on-board STK500 ISP for program	13
6.1 Connect hardware	13
6.2 Use AVRstudio ISP download	14
6.3 Use ICCAVR ISP download	15
7. Use JTAG for program	17
8. Use JTAG for emulation	18
9. Hardware resource	20
9.1 On-board AVR JTAG ISP 2in1	20
9.2 Power Supply	21
9.3 Atmega16 chip	22
9.4 8 separate LED	22
9.5 8 separate keys	23
9.6 Crystal oscillator and reset	23
9.7 7-segment LED display	24
9.8 USB1.1 communication interface	25
9.9 RS232 serial communication port	25
9.10 RS485 communication interface	26
9.11 18B20 and single bus	26
9.12 AD voltage adjustment potentiometer	27
9.13 PWM output	27
9.14 Real-time clock PCF8563	28
9.15 IIC bus EEPROM AT24c01	28
9.16 One active passive buzzer	28
9.17 LM358 signal conditioning	29
9.18 32Pin MCU external terminal	29
9.19 1602 LCD interface	30
9.20 12864 LCD interface	31
10. Material resources	32
10.1 CD content	32
10.2 Experimental contents	33
10.3 Expand board available	35
11. Service and support	36

The package includes:

  • One Easyavr M16 SK board with JTAG and ISP on it
  • One CD with user guide and the democode and schematic
  • One 9V DC Power adapter
  • One USB cable (A to B)
  • One user guide