Product Main

Specifications

Keywords:   ATmega128, ATmega64, AVR boards, ATmel Development Board, AVRJTAGICE, AVRISP

Introduction:

EasyAVR M128 SK is a system produce by AVRVi for AVR study and product development, Rich in resources, JTAGICE emulator and ISP downloader on board, the core board can pull down for single use, it’s a perfect tool for your AVR mcu study.

EasyAVR M128 SK User guide in English : EasyAVRM128SK_en.pdf ,  EasyAVR M128 SK 4in1 Quick start user guide

What's on the board:
1. External power supply for 5V DC
2. JTAG ISP 2 in 1 USB port
3. 2 RS-232 communication port
4. RS485 communication port
5. LCD12864/1602/12232 connector
6. External power supply for DC7~9V
7. ISP download connector on core board
8. Reset key
9. On-board clock oscillator circuit
10. JTAG connector on core board
11. 7-segment LED displays
12. 4 single keys control pins		 13. 8 LEDs
14. 1 beeper
15. PCF8563 real time chip
16. IIC E2PROM AT24C01
17. LMV358 Signal conditioning circuit
Adjustable gain 0.1-1000, input 0~10V
18. AD and 18B20 and NTC input connecter
19. Potentiometers for LCD and signal adjust
20. Fixed-hole
21. all pins out
22. the db core can pulled down, Leads all-pin
23. JTAG ISP work state led
24. the MCU Atmega128-16AU(L-8AU)

Features:

The following key features have been implemented:

  • JTAG ISP 2in1 On-board, you need not use other JTAG or ISP tool.
  • ATmega128 coreboard ,can be use single, minimum system basic circuit
  • On-board ATMEL ATmega128 microprocessor with 128Kb Program Flash,
    4Kb Data EEPROM, 4Kb RAM, 8 Channels 10-Bit A/D convertor and 2x16 Bit Times with 2x8 Bit PWM channels.
  • 8 LEDs and a 7 segment led on-board
  • 2 RS-232 and RS485 communication port
  • IIC E2PROM AT24C01
  • LMV358 Signal conditioning circuit
  • PCF8563 real time chip
  • 1 Beeper
  • LCD12864/1602/12232 connector

The package includes:

  • One Easyavr M128 SK board with JTAG and ISP on it
  • One Atmel ATmega128 core board
  • One CD with user guide and the democode and schematic
  • One USB power DC line
  • One USB cable (A to B)
  • One 9pin RS232 cable