Packaging & Delivery
| Packaging Detail: | standard cartoon 126*18*22cm 20pcs per cartoon |
| Delivery Detail | 15-20 days |
Specifications
1.TUV/PSE led lighting tube
2.LED type: SMD3528
3.Lamp Power: 18W
4.Luminous Flux: 1500-1600Lm
5.CE/FCC/RoHS/PSE/TUV
2.LED type: SMD3528
3.Lamp Power: 18W
4.Luminous Flux: 1500-1600Lm
5.CE/FCC/RoHS/PSE/TUV
TUV/PSE led lighting tube
Specifications:
- Material: 1/2 alminum ,1/2 milk-white PC cover
- Body size: Φ26×1200mm
- LED quantity: 288PCS
- Work voltage: AC80-265V
- Power consumption: 18W( equal to 45W conventional tube)
- Work temperature:-20oC-60oC
- Color of light source: White
- Emitting angle: 180°
- Color temperature: 5500-6500K
- Color rendering: >70Ra
- Luminous Flux: 1500-1600Lm
- Life Span:50000 hours
Main Features:
- No UV, no flickering,instant start,save energy
- Real replacement for conventional fluorescent tube,long lifetime
- No need for starter and electronics ballasts
- No mercury or hazardous materials
- 2 years guarantee
- High intensity; low heat; no flicking
- No UV and IR radiation
- OEM available
Applications:
1.Living room, bedroom,kitchen, washroom;
2.School, university, hospital,hotel;
3.Conference,meeting room, show room,showcase;
4.Commercial complexes;
5.Factory,plant,warehouse,office;
6.Supermarket,department store.
1.Living room, bedroom,kitchen, washroom;
2.School, university, hospital,hotel;
3.Conference,meeting room, show room,showcase;
4.Commercial complexes;
5.Factory,plant,warehouse,office;
6.Supermarket,department store.
Installation:
The same size tube can be installed on to the corresponding lamp holder directly before taking down fluorescent lamp starer.
1.LED tube can be directly installed into T8 or T10 bracket(take down fluorescent lampstarter);
2.LED tube light apply to inductive light holder.Electronic ballast fluorescent can't be replaced directly,should take down electronic ballast.
The same size tube can be installed on to the corresponding lamp holder directly before taking down fluorescent lamp starer.
1.LED tube can be directly installed into T8 or T10 bracket(take down fluorescent lampstarter);
2.LED tube light apply to inductive light holder.Electronic ballast fluorescent can't be replaced directly,should take down electronic ballast.
Notice:
1.Just remove the starter when replace fluorescent tube with inductance ballast
2.Electronic ballast must removed when replace fluorescent tube with electronic ballas.
1.Just remove the starter when replace fluorescent tube with inductance ballast
2.Electronic ballast must removed when replace fluorescent tube with electronic ballas.
mail: sales8 at szsyhled.com