1. VH-M512A_VH-M412A Four-Side Moulder Series
Detailed parameters:
●This adopts step-less material feeding, material feeding speed ranges from 4 to 18 m/min.
●Each principal axis adopts independent drive to elecrtric motor, features stronger cutoff force.
●Adjusts for principal axis integrates at central or frontal side, features easy operation.
●Galvanized workstation features superior abrasion resistance.
●Equips with auxiliary unit alarming lack of material, it effeectively improvises smooth feed-in while lack of material.
●Active roller below improve feeding efficiency.
●Equips with world-class electric element, features superior stability.
●Pneumatic pressing feeding roller section by section adjusts for pressing forcee, it favors for smooth feed-in of different thickness of timber.
●With fully sealed safety protective cover, this effectively avoids flying logging debris and noise blocked, and evenacts as safety protection.
●This adopts step-less material feeding, material feeding speed ranges from 4 to 18 m/min.
●Each principal axis adopts independent drive to elecrtric motor, features stronger cutoff force.
●Adjusts for principal axis integrates at central or frontal side, features easy operation.
●Galvanized workstation features superior abrasion resistance.
●Equips with auxiliary unit alarming lack of material, it effeectively improvises smooth feed-in while lack of material.
●Active roller below improve feeding efficiency.
●Equips with world-class electric element, features superior stability.
●Pneumatic pressing feeding roller section by section adjusts for pressing forcee, it favors for smooth feed-in of different thickness of timber.
●With fully sealed safety protective cover, this effectively avoids flying logging debris and noise blocked, and evenacts as safety protection.
|
Specification And Model
|
VH-M512A
|
VH-M412A
|
|
|
Machine Paramter
|
Working Width
|
25-160mm
|
25-160mm
|
|
Working Thickness
|
8-100mm
|
8-100mm
|
|
|
Working Table Length
|
1250mm
|
1250mm
|
|
|
Feeding Speed
|
4-18m/min
|
4-18m/min
|
|
|
Main Source Pressure
|
φ 40mm
|
φ 40mm
|
|
|
Main Shaft Revolution
|
6000r/min
|
6000r/min
|
|
|
Pneumatic Source Pressure
|
0.6MPa
|
0.6MPa
|
|
|
Motor Power
|
1" Lower Shaft
|
3kw/4HP
|
3kw/4HP
|
|
1" Upper Shaft
|
4kw/5.5HP
|
4kw/5.5HP
|
|
|
Right Vertical Shaft
|
3kw/4HP
|
3kw/4HP
|
|
|
Left Vertical Shaft
|
3kw/4HP
|
3kw/4HP
|
|
|
Top Spindle Lifting Motor
|
|
|
|
|
Left Shaft Adjusting
|
|
|
|
|
2" Upper Shaft
|
|
|
|
|
2" Lower Shaft
|
3kw/4HP
|
|
|
|
Universal Spindle
|
|
|
|
|
Motor Power
|
Feeding Beam Lifting
|
0.55kw/0.75HP
|
0.55kw/0.75HP
|
|
Feeding Motor
|
2.2kw/3HP
|
2.2kw/3HP
|
|
|
General Power
|
18.75kw/23.25.5HP
|
18.75kw/23.25.5HP
|
|
|
Hydraulic feed motor
|
|
|
|
|
Cutter Diameter
|
Right Vertical Shaft
|
φ 125-φ 160mm
|
φ 125-φ 160mm
|
|
Left Vertical Shaft
|
φ 125-φ 160mm
|
φ 125-φ 160mm
|
|
|
1" Lower Shaft
|
φ 125mm
|
φ 125mm
|
|
|
1" Upper Shaft
|
φ 125-φ 160mm
|
φ 125-φ 160mm
|
|
|
2" Upper Shaft
|
|
|
|
|
2" Lower Shaft
|
φ 125-φ 160mm
|
φ 125-φ 160mm
|
|
|
Universal Spindle
|
|
|
|
|
Remarks/mm
|
Feeding Wheel Diameter
|
φ 120mm
|
φ 120mm
|
|
Dust Outlet Diameter
|
φ 125mm
|
φ 125mm
|
|
|
Physical Dimension
(L*W*H) |
2900*1200*1610mm
|
2500*1200*1610mm
|
|