CS series desander is the second class solids control equipment of drilling-fluid solid control system. The design of desander cyclones are based on the centrifuge-setting principle of particles. The separating drilling fluid goes into the cyclone along its inner-wall at a certain pressure and speed made by the pump. The great particles are going down spirally along the inner-wall of the cyclone at the centrifugal force and the gravity , then running out through the underset nozzle and falling down on the close-mush shale shaker for further separation . The other fluid goes up along the centre of the cyclone spirally, and goes into the second class separating equipment desilter for further separating.
hlmudcleaning(at)hotmail(dot)com
CS series Desander Technical Parameters
|
Model
|
CS250×2
|
CS 250×2
|
|
Screen area
|
1.0m2(600×1600mm)
|
No Under fluids Shaker
|
|
Capacity
|
≤1056GPM
|
≤1056GPM
|
|
Cone size
|
10"
|
|
|
Cone number
|
1-2 Ea Cones, Specify cones No. when ordering
|
|
|
Pressure
|
0.21~0.4Mpa
|
|
|
Matching pump
|
SB5x4-14(37kw); SB8x6-13(55kw)
|
|
|
Inlet Size
|
100-150mm
|
100-150mm
|
|
Outlet Size
|
150-200mm
|
150-200mm
|
|
Separation size
|
47-56μm
|
|