Overview:

CL-C1200/C1100/C1101 FE1 to 10/100Base-Tx/Fx Ethernet Protocol Interface Converter is a high-performance, self-learning distant Ethernet Bridge with small size and low cost, which makes it suitable for cost-sensitive bridge connection as the LAN stretcher or separator based on the bite flow. It can study MAC destination address from the connected LAN constantly and determine whether forward or filter according to destination Mac address of data frames. Standalone and Rack mount module are both available.

 

Feature:

1. Developed from the integrated circuit with our own property right.

2. E1 interface supports two kinds of impedance: 120 ohm balanced and 75 ohm unbalanced.

3. Offer local loop back function.

4. Easy to operate with all the setting operated in the panel.

5. Ethernet interface supports five set mode: 10M full duplex, 10M half duplex, 100M full duplex, 100M half duplex and auto-negotiation, Support VLAN

6. Select timeslot randomly to combine data transmission channel at rate up to N*64K(N=1 to 32)

7. Desktop and rack style device have the same composition and function. Users can refit the desktop style in the rack style according to requirement, vice versa.