1, The LED display screen's brightness, contrast, saturation, and chroma can be adjusted manually or by sensor according to environmental demands, and the total color grade is 16.7 million.
2, The LED display apply the virtual pixel technique, enhance the display effect of LED screen.
3, Our LED display have good image illumination uniformity, nature color transitions reliability, stability and excellent consistency of signal output, without mosaic, and video transmission delay ascribing to static-constant current drive model.
4, The LED display have larger viewing angle, the largest is: Horizontal 150 degree, vertical 150 degree. Original and vivid display effect will be seen in this scope with color excursion free and image distortion free.
5, Each LED lamp in our LED display screen can be adjusted and repaired respectively, which assure the consistency of entire LED display screen and ensure the low fee of maintenance.

pH7.62mm indoor Full Color Display Specification
Pixel Pitch: 7.62mm
LED: R, G, B: China
Pixel Density: 17222 dots/m 2
Pixel Configuration: SMD1in1
Unit board Dimension: 243.84mm*121.92mm
Physical Resolution: 32*16
Cabinet Dimension: 975.36mm*731.52mm
Physical Resolution: 12896
Cabinet material: Iron
Weight: 60kg/m 2
Optimal Viewing Distance: 7-30m
Optimal Viewing Angle: 140degree(horz. ), 140degree(vert. )
Storaging Temperature: -40Celsius to +85Celsius
Working Temperature: -20Celsius to +50Celsius
Relative Humidity: 10%~90%
Thickness: Less than 18cm
Voltage: 220~110 V AC, 50~60 Hz
Max Power Consumption: 800 W/m2
Average Power Consumption: 320 W/m 2
Control Mode: Synchronization
Control System: PCTV+DVI
Frame Rate: 60Hz/sec.
Refresh Ratio: 400-600Hz/sec.
Scan Method: 1/8scan
Grey Scale/ Colors: 256 shades/16.7million
White Balance Brightness: More than 1600CD/m 2
Lifetime: 100000 hours
Video Signal: PAL/NTSC
Transmission Distance: 0~15km.