KL4EX:
The miner’s cap lamp complies with the following Standards:
The miner’s cap lamp complies with the following Standards:
EN 60079-0: 2006; EN 60079-11: 2007; EN 50303: 2000; IEC 62013–1: 2005
Characteristics:
a) The miner’s cap lamp consists of Li - ion batteries and a new generation LED light source.
b) The electronic switch controls the ON/OFF of the main light source and auxiliary light sources.
c) The miner’s cap lamp has multi-functional protection.
d) A charging control circuit is fitted inside the headpiece of the miner’s cap lamp. This circuit enables the miner’s cap lamp to be charged on other manufacturers chargers to meet the requirements of Section 4.1.
e) Due to the efficiency and long life of the LED light source, it is not necessary for this to be replaced before the battery life is exhausted.
f) The miner’s cap lamp is compact, light in weight, maintenance free, has long usage life, is intrinsically safe and environmentally protected.
Main specification
Item
|
Specification
|
|
Rated capacity
|
4Ah
|
|
Rated voltage
|
3.7V
|
|
Lighting time
|
≥11 hours
|
|
Explosion protection
|
Ex ia Ma
|
|
Main light source
Max luminance(1m apart from the lamp)
|
When lighting begins
|
>1500lx
|
After lighting for 11h
|
>800lx
|
|
LED
|
Rated Voltage
|
3.7 V
|
Main Light current
|
0.2 A
|
|
Sub-light curren
|
0.1 A
|
|
Battery life
|
2 years
|
|
Charging time
|
<10h
|
|
Charging voltage
|
6-8 V
|
|
Ingress protection
|
IP54
|
|
Weight
|
0.7Kg
|
|
Exterior dimensions
|
105mmx 29mm x 120 mm
|