Processable Fluoropolymer
Perfluorinated Ethylene-propylene Copolymer
Conformable with Q/DYS-2007
Fluorinated Ethylene Propylene resin is the copolymer of TFE and HFP, with good thermal stability, outstanding chemical inertness, good electrical insulation, and low coefficient of friction, enabling thermoplastic processing methods
Quality Specification:
| Item |
Unit
|
DS600
|
DS601
|
DS602
|
|
|
A
|
B
|
||||
|
Appearance
|
|
Translucent particles, without impurities such as metal debris and sand, containing visible black particles percentage point less than 2%
|
|||
|
Melting Index
|
g/10min
|
4.1～8
|
8.1～12
|
2.1～4
|
0.8～2.0
|
|
Tensile Strength, ≥
|
MPa
|
21
|
25
|
27
|
|
|
Elongation at break, ≥
|
%
|
300
|
300
|
320
|
|
|
Relative Gravity
|
|
2.15～2.17
|
|||
|
Melting Point
|
℃
|
265± 10
|
|||
|
Dielectric Constant(106HZ), ≤
|
|
2.15
|
|||
|
Dissipation Factor(106HZ), ≤
|
|
7.0× 10-4
|
|||
|
Volatile, ≤
|
%
|
0.1
|
|||
|
Heat Stress Cracking Resistance
|
|
— —
|
crackless
|
crackless
|
|
Main Applications:
DS600: Extrusion processed for generic type resin, mainly used for wire insulation layer, tubes, film, and so on.
DS601: Heat stress cracking resistant plastics, mainly for wire insulation layer, thin-walled tube.
DS602: The low melting index resin and heat stress cracking resistant moulding plastic, used for stress cracking resistant requiring and low or medium speed processing, mainly for heat shrinkable tubes, pumps, valves, piping and lining, wire insulation layer.
Attention:
The processing temperature should not exceed 420℃, to prevent toxic gas from releasing.
Package, Transportation and Storage:
1. Packed in double layer PVC bags, then closed to overpack bags, 25kg. Every bag with certification.
2. Stored in clean, cool and dry places, avoid contamination from foreign substance such as dust and moisture.
3. Nontoxic, noninflammable, not explosive, non-corrosion, the products are transported according to non-dangerous products.