Flexible Flat Elevator Cable
Specifications
0.75*2C~0.75*66C ,0.82*2C~0.82*60C,1.0*2C~1.0*66C,1.25*2C~1.25*66C,1.5*2C~1.5.*48C,2.0*2C~2.0*48C,2.5*2C~2.5*54C,3.0*2C~3.0*48C.
It is suitable as a control and connection cable for elevator and conveyors on building sites,container goods railway stations and dockyards where operating conditions are rough.
Outer sheath special polychloreprene basis (Butadiene-acrylonitrile rubber), cold-flexible(-150C), flame retardant and self-extinguishing
Flat Elevator Cable Conductor stranding:
1.superfine copper strands acc. to VDE 0295, class 5
2.core insulation, resistant to oil, flame retardant and self-extinguishing
3.core colours acc.to 227IEC (brown,blue,black,green/yellow)
4.Flat Cables with 3 cores or more contain black with consecutive white green/yellow
outer sheath based on with polyvinyl chloride as resistant to oil, flame retardant and self-extinguishing
(acc. to VDE 0482, part 265-2-1 resp.EN 50265-2-1 and IEC 60332-1).
Colour black(RAL9005) or Gray(RAL7001).
Flat Elevator Cable Test voltage:: ≤0.75mm 2500V:
≥0.75mm 3000V:
Static flexibilitv test:0.3m<L<0.6m:
Burning vertically test:GB/T1 8380.1-2001,IEC60332-1:1 993 test passed
Product standard:GB5023, IEC60227—6, EN5021 4.
Burning vertically test:GB/T1 8380.1-2001,IEC60332-1:1 993 test passed
Product standard:GB5023, IEC60227—6, EN5021 4.
Temperature:-1 50c to+700c:
Flat cables are recommender for installations where the suspended length
doesn’t exceed 80m:and the speed of travel doesn't exceed 4m/s.
doesn’t exceed 80m:and the speed of travel doesn't exceed 4m/s.
If more than this ,with the bearing(steel rope)