Digital control incubator shaker have heating system and cooling system. It is the combine of temperature control incubator and shaker. It is a necessary Lab apparatus for botany, biology, microbiology, genetic, virus, medicine, environmental protection, food, petrochemical industry and the education research.
Main features: 1) The incubator’s heat insulating material is polyurethane foaming in place, The insulating have good heat-retaining capacity. 2) The working chamber has the air flue, so the temperature distribution is uniform. 3) Intine is made of stainless steel, have the good corrosion resistance 4) The working chamber’s temperature can arrive 50℃, by the heating system, when the environment temperature is -5℃. 5) The working chamber temperature can lower to 5℃, by cooling system, when the environment temperature is 32℃. 6) All-powerful spring sample bottle support is satisfied for fostering multiply comparison biological specimen. 7) Stepless speed regulation and handling safety. 8) Accurate temp control and digital control.
Technical specification
|
|
BS-1E
|
BS-2F
|
||
|
Volume
|
160L
|
520L
|
||
|
Temperature range
|
5– 50℃
|
|||
|
Temperature undulation
|
≤±1℃
|
|||
|
Rotating speed
|
start—250r/min
|
|||
|
Oscillation Amplitude
|
20mm
|
|||
|
Environmental
|
Environment temp: 5℃--30℃;
Relative humidity≤80%
|
|||
|
Bottle can load
|
500ml×7; 250ml×12
|
500ml×14; 250ml×24
|
||
|
Heat Power
|
300W
|
600W
|
||
|
Compressor power
|
226W
|
480W
|
||
|
Power Supply
|
AC230V, 50Hz
AC120V, 60Hz
|
|||
|
Cartridge fuse
|
Φ6×30 15A
|
|||
Note: The above products with speed detection and digital show.
Before using should know
1. Please read the operational manual carefully before using the machine.
2. The machine should keep away from heat and heating substance. The radiation should place where have a good ventilate. The radiation should be far from barrier more than 20cm.
3. The machine can’t be used under direct sunlight.
4. When do the low temperature experiment, the environment temperature must lower than 32℃.When the environment temperature is higher than 25℃, please do you best not to open the machine’s door.
5. The experiment samples should be arranged in neat rows in the machine chamber, don’t block the airiness.
6. In order to increase the service life of the machine, please keep the machine working environment temperature between 20℃ to 25℃ .