Magnetic heating stirrer has the functions of double direction magnetic stirrer and heating. It is easy to operate stepless speed regulation. The thermostatic magnetic stirrer can carry on precise stable agitation for the fluid in a high speed scope. It is especially applicable to the sample in small size. It is a necessary tool for drawing the petroleum, chemical engineering, medicine hygiene, environmental protection and the education research.

 

Technical specification

Model: 78-2

Speed range: start-up----1400r/min

Plate area: Ф125mm

Heating power: 150W

Heating Temperature: 250℃

Working power: AC230V 50Hz, AC220V 50Hz, AC120V 60Hz

 

Usage description

1.      Please read the instruction manual carefully before using the machine.

2.      The machine working plate can not be too smooth.(such as ceramic tile)

3.      The rated parameter of the power grounded outlet should be bigger than the rated parameter of the machine.

4.      The machine can not be heated without load, or it will destroy the heating plate.

5.      The speed should adjust from low speed to high speed slowly.

 

Operation

1.      Put the testing vessel (or other vessel) this is filled with liquid on the working plate.

2.      Plug in the outlet electric and turn on the switch, and the light is on.

3.      Adjust the speed knob to choose the required speed.

4.      If the heating is needed, please turn on the heating knob.

5.      After work, turn off the power and adjust the knob to the low speed. Then turn off the heating knob and shut off the power.

 

Notice

1.      The vessel should be put on the firm worktable and the airflow is through.

2.      The heating plate is high temperature, please take care.

3.      The working machine must not be moved.

4.      The machine must not be hit by any object.

5.      Children are forbidden to close the machine.

6.      Before changing the fuse, please make sure the power is off.

7.      After using, please keep the machine clean.

 

Maintenance

1.      Correct maintenance and care on the machine can keep the using life of the machine longer.

2.      Hard object is forbidden to clean the machine, so that the surface can be kept well.

3.      Please check if all the functions of the machine is good when you reuse the machine after a long time.

4.      Please contact the factory when the machine has any abnormity. Please do not operate it by yourself.