With a function of constant temperature, featured by magnetic stirrer hot plat, stepless speed regulation and simple operation, thermostat magnetic stirrer hotplate is especially applicable to the sample in small size. It is a necessary tool for drawing the petroleum, chemical engineering, medicine hygiene, environmental protection and the education research.
Technical specification
Model: 85-2
Speed range: start-up----1400r/min
Stirring power: 3—6W
Plate area: Ф125mm
Temperature control range: Room temp--100℃
Temp Accuracy: ≤±1℃
Heating power: 150W
Usage description
1. Please read the instruction manual carefully before using the machine.
2. The machine working plate can not be too smooth. (Such as ceramic tile)
3. The rated parameter of the power grounded outlet should be bigger than the rated parameter of the machine.
4. The machine can not be heated without load, or it will destroy the heating plate.
5. The speed should adjust from low speed to high speed slowly.
Operation
1. Put the testing vessel (or other vessel) which is filled with liquid on the working plate.
2. Adjust the timer button to the time you need, if long time working, adjust the button to normally open
3. Plug in the outlet electric and turn on the switch, and the light is on.
4. Adjust the speed knob to choose the required speed. Magnetic stirring bar is big, please adjust the speed slowly.
5. Adjust temperature: Put the probe into the liquid, adjust the temperature knob to the required temperature.
6. After work, turn off the power and adjust the knob to the low speed. Then turn off the heating knob and shut off the power.
Notice
1. The vessel should be put on the firm worktable and the airflow is through.
2. The power should be the power grounded outlet.
3. The working machine must not be moved.
4. The machine must not be hit by any object.
5. Children are forbidden to touch the machine.
6. Before changing the fuse, please make sure the power is off.
7. After using, please keep the machine clean.