80-2B Low-speed desk centrifuge are widely used in clinical medicine, biochemical, immunology and so on. It is a conventional instrument for centrifugation in Lab.
Technical Data
Maximum Speed: 4000r/min
Maximum Relative Centrifugal Force: 1700xg
Time Range: 0—60min
Power: 90w
Power Supply: AC110V /60Hz
Physical dimension: 300*300*260mm
Rotor specification
|
Rotor No:
|
Capacity
(ml×number)
|
Maximum Speed
(r/min)
|
|
1
|
15×12
|
4000
|
1. Please read the operational manual carefully before using the machine.
2. The centrifuge’s working environment: temperature: 5-40℃, relative humidity ≤80%. No electric dust, explosive gas, corrosive gases in the air.
3. Put the machine on a level and strong table and keep the working room clean, dry and ventilated.
4. Clean the rotor and container before operating.
5. Place empty centrifugal tube evenly before working, after working 1-2 minutes at the maximum speed, then begin to work if there’s no problem.
Using Description
1. Prepare according to before using should know.
2. Push the open knob to right, open the lid. Put the test tube (with same weight ) into the centrifugal hole. Close the lid.
3. Press the “switch” knob, chose the timer, by press “▲” “ ▼” to setup the time you need.
4. Press the “switch” knob, chose the speed, by press “▲” “ ▼” to setup the speed you need. You can chose 1000r/min, 1500r/min, 2000r/min, 2500r/min, 3000r/min, 3500r/min, 4000r/min.