Professional car diagnostic tool Honda HIM
( Honda & Acura Diagnostic System)is the latest diagnostic equipment for Honda vehicles. Diagnostic functions available for vehicles of HONDA/ACURA from year 1992 to 2007.
Test coverage: Dynamical, Body, Chassis, ABS, SRS, Anti-theft, etc.
It supports CAN BUS system, and it can re-program the Auto ECU. This HIM is based on PC operation platform. Very easy to use.
Main Function:
1.Read out trouble code, Erase trouble code.
2.Data Stream.
3.Drawing data stream curve.
4.System settings.
5.Control Unit programming.
6.Selftest interior status of IC.
7.Record and Re-display.
8.Bidirectional Control function – Read out responsed data under Drive actuation components.
Accessories
1.HIM Module with OBD II Cable.
2.HDS software DVD.
3.3-Pin Cable.
4.220V Power Supply.
5.RS232 Cable.
6.OBDII Selftest Adapter.
7.Storage case.
1.Read out trouble code, Erase trouble code.
2.Data Stream.
3.Drawing data stream curve.
4.System settings.
5.Control Unit programming.
6.Selftest interior status of IC.
7.Record and Re-display.
8.Bidirectional Control function – Read out responsed data under Drive actuation components.
Accessories
1.HIM Module with OBD II Cable.
2.HDS software DVD.
3.3-Pin Cable.
4.220V Power Supply.
5.RS232 Cable.
6.OBDII Selftest Adapter.
7.Storage case.
Functions supported by Honda/Acura protocols:
Reading and decoding fault codes from control blocks' memory;
Deleting fault codes;
Displays system's current parameters in digital form;
Displays system's current parameters in graphical form;
Combined displaying of data;
Management of executive devices;
Logs keeping - writing and keeping of digital parameters in memory;
Special functions - changing of permissible settings of blocks, programming etc.
Functions supported by OBD-II protocols:
Mode 01 - Displays system's current parameters in digital form (up to 8 parameters at once);
Mode 02 - Displays parameters of "freeze" frame;
Mode 03 - Reading and decoding of fault codes from control block's memory;
Mode 04 - Deleting of fault codes (memory clearing);
Mode 05 - Displays results of oxygen sensors;
Mode 06 - Displays results of changeably controled systems and components;
Mode 07 - Displays results of constantly controled systems and components;
Mode 08 - Management of executive devices;
Mode 09 - Displays car's identification info.
Hardware and software requirements:
PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later)
Hard disk drive with at least 400MB of free space
CD-ROM drive (if a high-speed Internet connection is not available)
RS232 port required to connect PC to HIM (PC version software only)
Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)
Internet connection (high-speed connection recommended)
Hard disk drive with at least 400MB of free space
CD-ROM drive (if a high-speed Internet connection is not available)
RS232 port required to connect PC to HIM (PC version software only)
Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)
Internet connection (high-speed connection recommended)