Product Description
Product ID: 107-21-1
Product Name: Ethylene Glycol
Specifications: 99.9%
Product Remarks: Ethylene Glycol
Product Category: Glycol
1. Detailed introduction:
Synonyms: 1.2-Ethanediol; Monoethylene glycol, MEG
Molecular Formula: C2H6O2
Molecular Weight: 62.07
CAS No.: 107-21-1
HS Code: 29094200
2. Properties: The ethylene glycol family of products are clear, moderately viscous, hydroscopic liquids at room temperature, For your convenience, below is a summary of specifications and typical properties of the three major ethylene glycols: Ethylene Glycol(EG), Diethylene Glycol(DEG), and Triethylene Glycol(TEG).
3. Applications:
(1) Freeze protection, heat transfer and hydraulic fluids; Natural gas and hydrocarbon treating agent.
(2)Hydroscopic agents for paper, cork and textile conditioning.
(3)Plasticizer formulations and raw materials for ester and polyester production.
(4)The ethylene glycol family's solvency properties are useful in custom formulation of paints, dyes, inks and other blended products.
4. Packing: 230kgs plastic drums, 18.4mts in the 20"FCL.
Product Name: Ethylene Glycol
Specifications: 99.9%
Product Remarks: Ethylene Glycol
Product Category: Glycol
1. Detailed introduction:
Synonyms: 1.2-Ethanediol; Monoethylene glycol, MEG
Molecular Formula: C2H6O2
Molecular Weight: 62.07
CAS No.: 107-21-1
HS Code: 29094200
2. Properties: The ethylene glycol family of products are clear, moderately viscous, hydroscopic liquids at room temperature, For your convenience, below is a summary of specifications and typical properties of the three major ethylene glycols: Ethylene Glycol(EG), Diethylene Glycol(DEG), and Triethylene Glycol(TEG).
3. Applications:
(1) Freeze protection, heat transfer and hydraulic fluids; Natural gas and hydrocarbon treating agent.
(2)Hydroscopic agents for paper, cork and textile conditioning.
(3)Plasticizer formulations and raw materials for ester and polyester production.
(4)The ethylene glycol family's solvency properties are useful in custom formulation of paints, dyes, inks and other blended products.
4. Packing: 230kgs plastic drums, 18.4mts in the 20"FCL.
| Item | Quality Criteria | |||
| Premium | 1st grade | On-spec | ||
| Purity | 99.9% | 90% | ||
| 1 | Appearance | Colourless, transparent, no mechanical admixture | Colourless, transparent, no mechanical admixture | Colourless, transparent, no mechanical admixture |
| 2 | Colour(Pt-Co) No. Before heated addition of chlorhydric acid, heated | < = 5 < = 20 | < = 15 -- | < = 40 < = 1 |
| 3 | Density(20)g/cm3 | 1.1131-1.1136 | 1.1125- 1.1140 | 1.1120-1.1150 |
| 4 | Water, % (m/m) | < = 0.05 | < = 0.2 | -- |
| 5 | Boiling range (0.0.10133MPa), Initial point Dry point IBP-DP | > = 196 < = 2 | > = 195 < = 200 | > = 193 < = 204 |
| 6 | Acidity (calculated As sulphuric acid), % (m/m) | 0.001 | < = 0.004 | < =0.008 |
| 7 | Aldehyde (calculated as formaldehyde), % (m/m) | 0.0008 | -- | -- |
| 8 | Iron (calculated as Fe2+), % (m/m) | < = 0.00001 | < = 0.0005 | -- |
| 9 | Ash, % (m/m) | < = 0.002 | < = 0.002 | --- |
| 10 | DEG and TEG, %(m/m) | < = 0.1 | < = 1.0 | ---- |
| 11 | Chlorine (calculated as chlorine ion), %(m/m) | < = 0.00005 | < = 0.001 | < = 0.002 |
| 12 | * Ultraviolet transmittance % 220nm 275nm 350nm | > =70 > = 90 > = 88 | ---- ---- ---- | --- --- --- |