poe adapter
Features and Functions
PROCET PT- PSE108G is a single-port split network remote power supply device. It is suitable for indoor, can work normally between 100VAC~280VAC input voltage. This power supply use category super type 5 cable to connect to other network termination equipments, is suitable for 10/100/1000M network environment,effect distance of power supply is 100M.
| Model | PT- PSE108G |
| Load regulation | -48VDC±1% |
| No. of Ports | 1 Port |
| Pass Through Data Rates | 10/100M |
| User Port Power | 15.4 Watts |
| Power over Ethernet Output Pin Assignment and Polarity | 1/2(+) 3/6(-) |
| Input Power Voltage | 100 ~ 240V AC |
| Output Power Voltage | 100 ~ 240V AC |
| AC Frequency | 50 ~ 60HZ |
| Connectors | Shielded RJ-45, EIA 568A and 568B |
| Dimensions | 160 (L) x60 (W) x 32 (H) mm |
| Weight | <160g |
| Operating Ambient Temperature | -15 to 55 C |
| Reliability MTBF | >100k hours |
| Relative humidity | 5%~90%RH |
| DC output voltage | 3.4kHz~150kHz≤50mv |
Remote power supply protection:
Range of output over-voltage protection: -52VDC~-50VDC
Over-current protection(Single circuit): 350Ma~400Ma
Over voltage protection: Input voltage over 290VAC~310VAC
Over voltage recovery point: Input voltage over 285VAC
Under voltage protection: Input voltage under 80VAC~85VAC
Under voltage recovery point: Input voltage under 90VAC
Over-temperature protection:>100°C
Ethernet ports light instructions
Red light POWER on: Show power working normally
Green light ACTIVE on: show equipment supply power normally
Red light POWER on: Show power working normally
Green light ACTIVE on: show equipment supply power normally
Installation and Commissioning
1.Connected output signal line respectively
1.Connected output signal line respectively
2.Connect communicating & introducing line, signal wire, output lines tightly to avoid bad contacts and loose.
3. Insert the input power line into 110-220VAC introducing input socket.