Product Main

Specifications

poe

Features and functions
PROCET PT-PSE401 is a four ports concentrated network remote power supply implement.Built-in power supply, metal body. It is suitable for indoor, can work regularly between 100VAC ~ 280VAC. input voltage This power supply use super type 5 cable to connect with network terminal equipment, is suitable for 10/100 M network environment.

 

Model PT-PSE401
System reliability MTBF>100k hours
No. of Ports 4 Ports 
Temperature -15°C~+55°C
Relative humidity 5%~90%RH 
Input voltage 100VAC~280VAC,47Hz~63Hz 
Maximum output power 75W 
Output voltage regulation accuracy -48VDC±2% 
Load regulation -48VDC±1% 
Dimensions 154(W) x44 (H) x210 (D) mm 
Weight <3kg 
DC output voltage of broadband noise 3.4kHz~150kHz≤50mv 0.15MHz~30MHz≤20mv
Range of output over-voltage protection -52VDC~-50VDC
Over-temperature protection >100°C 
Over-current protection(Single circuit) 350Ma~400Ma 
Over voltage protection Input voltage >290VAC~310VAC 
Over voltage recovery point Input voltage > 285VAC
Under voltage protection <85VAC~90VAC 
Under voltage recovery point <100VAC 
Safety Approvals  CE,RE,EN55022,CLASSB 
Discrete noise voltage:
3.4KHz~150KHz≤5mv
150KHz~200KHz≤3mv
200KHz~500KHz≤2mv
0.5MHz~30MHz≤1mv
Ethernet ports light instructions
Red light POWER on:Show power working normally
Green light ACTIVE on: show equipment supply power normally
Green light in network port is on and then off after several seconds show overload protection or short circuit.
Red light shining slightly in use shows feed part of the network port is off-loads, can judge there is a glitch of the power supply or far-end equipment.
Installation and Commissioning
1. Insert the input power line into 100-220VAC introducing input socket.
2. Connect output signal line respectively
3. Connect communicating & introducing line, signal wire, output lines tightly to avoid bad contacts and loose.