1. General description:

1.1ZJ130 Glass drilling machine is a cold processing machine which is easy to drill holes on sheets of glass and is equipped with upper and lower drilling bit.

1.2An automatic cylinder drives the lower-drill bit while the upper bit is operated by manual.

1.3Holes of different sizes can be achieved with bits of different diameters.

1.4 this machine works efficiently, it has low glass damage and is easy to operate.

 

2. Technical parameter:

1. Hole Diameter: φ 5～φ 220㎜

2. Glass thickness range: 3 ~20 mm

3. Max. Size of Processing glass: 2700× 2200mm

4. Height of Working Table: 870mm

5. Distance between drilling center and back column: 1300 mm

6. Hole at drilling axis and drilling bit connection end: taper k=60°, screw hole G1/2”

7. Size: 750× 2200× 1700mm (L× W× H)

2200× 2500× 1700mm (with floating working table)

8. Weight: 1000KG (with floating working table)

9. Power: 4.95Kw (with air compressor 1.5kw)