Brand name:Jinge Model No:YN30A Type: drill rig Condition: used
Engine type: single-cylinder,air cooling,two stroke
Engine displacement: 185.cu.cm
Vaporizer type : Hand needle vavle,non-floating-vavle plate type
Impact energy:>=22J
Drilling speed:>=250mm/min
keyword: rock drill
More keywords: internal combustion rock drill,combustion rock drill
1. Discription:
Easy operation, time saving, labor saving and fast drilling as well as high efficiency.
Features
1. The Internal Combustion Rock Drill Type YN30A is a hand-operated rock-drilling tool, composed of a small petrol engine, an air compressor and a rock drill.
2. During operation, the rock powder is blown away by the compressed air produced by the machine itself.
3. Carrying easily as the main engine weight only 30kg. Suited to work on high mountains, or places with no powersupply and air compressing equipment, and especially suiting the temporary projects because the machine can be carried at any time and any place.
4. As operation, it can be handled horizontally, vertically downward, or upward at an angle below 45°. When turned vertically downward, it can drill to the maxim depth of 6m.
2. During operation, the rock powder is blown away by the compressed air produced by the machine itself.
3. Carrying easily as the main engine weight only 30kg. Suited to work on high mountains, or places with no powersupply and air compressing equipment, and especially suiting the temporary projects because the machine can be carried at any time and any place.
4. As operation, it can be handled horizontally, vertically downward, or upward at an angle below 45°. When turned vertically downward, it can drill to the maxim depth of 6m.
It is a small rock drill composed the power machine,working machine and air compress in one.It is powered by the small gasoline engine and used for drilling on the hard rock or rock with medium hardness.Because it self powered,it is especially convenient to be used for projects without other power supply,or projects that are inconvinent for conveying the large volume unit,or for mobile construction projects.
2. Packing:
Wooden case
3. Specification:
|
Type of carburetor
|
non-floating type
|
|
Ignition system
|
controllable silicon
|
|
Displacement of engine piston
|
185 cm3
|
|
Load speed of engine (mean value of five holes)
|
2700∼3000 r/min
|
|
Idle speed of engine
|
≤2200 r/min
|
|
Shaft bar idle speed
|
180 r/min
|
|
End of drill rod dimensions
|
hexagonal 22x108 mm
|
|
Thrust force
|
≥20J
|
|
Drilling speed(mean value of five holes)
|
≥200 mm/min
|
|
Maxim elevation angle
|
45°
|
|
Maxim drilling depth
|
≥6 m
|
|
Tank capacity
|
≥1.65 L
|
|
Fuel consumption (mean value of five holes)
|
≤0.13 L/m
|
|
Mixture ratio of gasoline and lubricating oil (in volumes)
|
|
4. Applications:
1. The machine is used for rock drilling. It can be used as breaker or hammer for breaking, digging, splitting and ramming by changing some components concerned.
2. It has far-ranging applicability and can be used in various environments such as high mountains, plains or in districts as hot as forty degrees centigrade or as cold as forty degrees below zero centigrade.
2. It has far-ranging applicability and can be used in various environments such as high mountains, plains or in districts as hot as forty degrees centigrade or as cold as forty degrees below zero centigrade.