YG-3826 CNC FULL AUTOMATIC ROTATING GLASS CUTTING MACHINE WITH CHEAPER PRICE

1. Technical Data and Configuration

1) Instruction and Technical Data

Sheets are automatically handled by means of 5 symmetrically positioned carrier belts that lift according to a pattern designed to avoid opening the cuts. To make translation easier and avoid undue stress on the mechanical parts and wear on the carpet, the work surface is equipped with an air cushion whose intensity is automatically adjusted by the NC in relation to glass thickness (and, therefore, to the sheet' s weight). The sheet is centered automatically, in one of two ways (as selected by the machine operator): electronically, using a laser probe; or mechanically, using centering devices. This offers double safety (no machine stoppage in case of malfunction) and extra potential to meet different work demands (manual feed through free-fall).

 

This automatic CNC-shaped glass cutting machine allows users to cut out any shape of glass with high precision. AUTO CAD designed graphs and figures, automatic cutting, with all the cutting data fully computer controlled. The operator can edit the glass size for cutting with computer. The computer can optimize the cutting size, and give out the data for processing, driven the machine to cut glass sheet automatically in high speed and high precision.

①Use professional computer software equipped professional cutting and optimized composing system. It features easy operation, high accuracy and fast speed. Cutting speed can be adjustable.

②Cutting beam was imported from German high precision rack and rail. It features high accuracy.

③Main parts were imported from brand products. It features high quality and long life.

④Maintain and operation were easy for the machine. Edit the glass size for cutting with computer. The computer can optimize the cutting size, and give out the data for processing, driven the machine to cut glass sheet automatically in high speed and high precision.

Max Cutting Size (mm)                                3660*2440mm

Max Cutting Speed (m/min)                        0-120 (adjustable)

Cutting Accuracy (mm/m)                        ≤ ± 0.15

Glass Cutting Thickness(mm)                  1～19

Voltage (V)                                              220V/380V (Three Phases)

Dimension (LWH)  (mm)                  4700x3100x900mm

Weight: 2600Kg

Power: 9Kw

 

Transmission System: Axis X, Y and Z adopts servo motor made in Japan, and accurate gauge cutter device.

Cutting Holder: Air pressure and spring together, cutter head can rotate 360 degree, cut up and down. It can cut any shapes glass (line, round and shapes, etc)

Fuel System: Automatic oiling system, the oil pressure can be adjusted freely.

Conveyer System: air float and synchronous automatic transmission device is convenient for glass movement.

Locating System: It is composed of mechanical locating system and optoelectronic scanning system.

The optoelectronic scanning and cutting is automatically finished in the process of stream line operation, not need locating by operators.

Staff Requirement: 1 Person (Be familiar with knowledge of glass cutting and computer)

 

2) Mechanical Part:

Board: Imported waterproof and fireproof board (planes: ≤ 0.20mm/m)

Rack Bar/Guide way: made in Japan

Transmission Tape/Roller: Barbieri made in Italy

Cutter Wheel/ Holder: made in taiwan

Table-board: Imported Felt (back) made in Korea

Cutter Saddle: Pneumatic and Imported Spring used together (to reach the best cutting effect)

Conveyor System: Auto-induction conveyor device (Three synchronous belt automatic transmission and two proximity switch to make sure it can reach automatic induction and automatic transmission to save labor power)

 

3) Electrical Part:

PC Control and Microsoft Windows Interface

Power Supply: 220V/60Hz. With voltage stabilizer

Motor: YASKAWA made in Japan; with American control card

Frequency Converter: YASKAWA made in Japan

Variable-frequency Motor: YASKAWA made in Japan

 

4) Pneumatic part:

Airtac made in Taiwan

 

5) Software:

The specialized cutting software (used under windows interface), with many kinds of cutting gallery (easy for drawing and operation), work together with AUTO CAD.

It has the automatic amend function to make sure the cutting accuracy.

Cutting Path Choose function to make sure the best cutting speed

Input Operation: keyboard and mouse, with Chinese-English interface

The cutting pressure automatic adjustment function to make sure the best effect.