Hammer crusher is suitable for mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc.
Hammer Crusher Operating Principle:
Hammer crusher The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size.
Hammer crusher The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size.
Hammer Crusher Specification:
Model
|
input size
|
output size
|
capacity
|
Motor
|
weight
|
dimension
|
||
(mm)
|
(mm)
|
(t/h)
|
(t)
|
(L×W×H)(mm)
|
||||
pole
|
(kw)
|
|||||||
PCΦ1600×1500
|
≤500
|
≤35
|
200-300
|
8
|
480
|
37.5
|
3050×2850×2800
|