DDM100SC single phase DIN-Rail Energy Meter Four Module.
FUNCTIONS AND FEATURES
1. 35mm standard DIN-rail installation or front board setting, complying with standard DIN EN50022. Or front board setting (mounting holes center distance 63 mm), users can choose any one by themselves.
2. Four poles width.
3. LCD 6+1 or 5+2 digits display without backlighting, may select with white backlighting.
4. Standard configuration one port of pulse output passive (polarity), may select increase a distant port of pulse output passive (nonpolarity). And contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864.
5. Bicolor LED instructions respectively power supply state (green) and signal of power impulse(red).
6. Standard configuration don't detection direction of the flow of load current. May elect automatic detection the direction of the flow of load current. And instructions by an individual LED.
7. Single direction measures single phase two wire active power consumption. It is nothing with direction of the flow of load current,
Complying with standard IEC62053-21, IEC62052-11.
8. Directly connect operation or through CT or PT & CT.
9. Standard configuration short terminal cover, which is helpful to reduce installation space and make it convenient to install; May select extended terminal cover, which is for protecting the safety of using electricity.
FUNCTIONS AND FEATURES
1. 35mm standard DIN-rail installation or front board setting, complying with standard DIN EN50022. Or front board setting (mounting holes center distance 63 mm), users can choose any one by themselves.
2. Four poles width.
3. LCD 6+1 or 5+2 digits display without backlighting, may select with white backlighting.
4. Standard configuration one port of pulse output passive (polarity), may select increase a distant port of pulse output passive (nonpolarity). And contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864.
5. Bicolor LED instructions respectively power supply state (green) and signal of power impulse(red).
6. Standard configuration don't detection direction of the flow of load current. May elect automatic detection the direction of the flow of load current. And instructions by an individual LED.
7. Single direction measures single phase two wire active power consumption. It is nothing with direction of the flow of load current,
Complying with standard IEC62053-21, IEC62052-11.
8. Directly connect operation or through CT or PT & CT.
9. Standard configuration short terminal cover, which is helpful to reduce installation space and make it convenient to install; May select extended terminal cover, which is for protecting the safety of using electricity.