Description:

1.This independent alarm is a wireless infrared reaction product.

2.There have remote controllers. each remote controller have own code. remote pass the remora. There are four buttons on the controller. arm, disarm, emergency button, arm again.

3.The device doesn’t detect the altering signals in 30seconds,after automatic defense-deploying is initiated, so please leave the detected area within this period.

4.The device will give alarm for 60 seconds once it detects anybody entering the detected area. After the alarm stops ringing for 5 seconds, the infrared detector will automatically reset and go into detection again.

5.When the infrared detector is alarming, the sound can be stopped by remote controller.

6.The infrared detector can be powered by both DC power supply or AAA chargeable batteries in case of unexpected power-off.

7.As a result of a dual infrared sensors with special infrared integrated circuit, with accurate reporting, high reliability, high cost performance characteristics, suitable for home, office, garden, street stores and other places need anti-theft alarm.

Technical Parameters:

Operating Voltage:AC:110V-240V

DC9.6V(8pieces,AAA rechargeable battery)

Standby current: ≤10mA

Alarm current ≤150mA

Detection range:7-12meters

Remote distance:100m(open air)

Infrared Angle:110°(RL)   Installation Angle:10-30degree

Alarm sound level:≥110dB(within 1m)

 

Installation:

1.Universal bracket to the ground at a distance of 2 meters place.

2.Infrared remote control warning device into the wall should be 10 to 30 degrees angle.

3.avoid infrared warning devices installed near the heat source, such as hot and cold air outlet, air vent, heater, air cooler, avoid direct door.

Packing:

50pcs/Carton GW:16KG  NW:14KG