| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | Yitai |
| Model Number: | 25W |
| Output Power: | 1 - 50W |
| Output Type: | Single |
| Size: | System case:L200*W140*H60,solar panel:L530*W350*H25 |
| Weight: | System case:6KG,Solar panel:2.5KG |
| Input Voltage: | 12V |
| Output Voltage: | 12V |
| Type: | DC/DC Converters |
| Output Frequency: | 50/60HZ |
| Output Current: |
Quick Details
Specifications
This product is a practical strong small solar power system for home lighting.
It is suitable for lacking of electricity power but full of sunny,it also widely use for travel, lighting, grasslands, camping, agriculture and forestry, mountain villa, island, fishing-boat, frontier guard post, emergency lighting and no electricity area It can be used for lighting and mobile phone charger.
Technical parameters:
|
Fittings designation |
Specification parameter |
|
|
Solar panel |
mono-poly |
25W/18V |
|
battery |
Valve-Regulated Lead Acid Battery |
12AH/12V |
|
controller |
|
5A/12V |
|
Output |
DC |
12V/5A |
|
USB |
5.5V/8.4V |
|
|
Size |
System case:L200*W140*H60,solar panel:L530*W350*H25 |
|
|
Weight |
System case:6KG,Solar panel:2.5KG |
|
Working parameter:
|
Solar panel |
Rated power |
25W |
|
short circuit current |
1.53A |
|
|
Working current |
1.39A |
|
|
Open circuit voltage |
21.24V |
|
|
Working voltage |
18V |
|
|
controller |
Rated voltage |
12V |
|
Output current |
5A |
|
|
Charging resume voltage |
13.3V/26.6V/lead |
|
|
Battery overvoltage protection/resume |
16.5V/15V |
|
|
Range of owe voltage disconnecting |
10.6V-11.6V |
|
|
Range of resuming voltage |
12.2V-13.2V |
|
|
Efficiency |
more than 85% |
|
|
DC Max. Output |
12V/5A |
|
|
Working time |
1pcs*3W LED lamp can work 33hours continuously |
|
|
Working temperature |
-20degree centigrade to 50 degree centigrade |
|
Fault and solutions:
1.Charging indicator light is not bright, it can't charge into electricity
(1)this solar power system cannot be installed in good light place.please put it into bright light.
(2)solar panels line fall off,need professional maintenance personnel.
(3)charge controller line fall off,need professional maintenance personnel.
2.charging without bright light:Light or lamp cable has a problem.
3.output without bright light:
(2).Light or lamp cable has a problem.
(2) .Low battery;solution way:charging to battery.
4.No output,DC output and alarm indicator are not working:
(1).low battery;solution way;charging to battery.
(2).Line inside the case fall off and damage, need professional maintenance personnel.
5.USB is no output.
Connect USB charging interface without output response, need professional maintenance personnel.
6.Electrics supply.
After connecting electrics supply,there is no any indicator of charger,it need to professional maintenance personnel.