MATERIAL ]: Cu≥60.78%, Pb<1.8%, Fe<0.2%, Solid brass body,brass handle.
[ MANUFACTURE TECHNOLOGY]:Gravity die-casting brass body.
[ PLATING ]: Chrome-plated finish, Cr≥0.2μm,Ni≥12μm. Shining permanently.
[ SALT MIST TEST ]: 200 hours,corrosion status comply with international standard, anti-oxidation, anti-rust spot
[ CARTRIDGE ]: High quality durable cartrdige, more than 50,000~70,000 times(EN41) open and close.
[ AERATOR ]: Copper Shell, plastic core instead steel, avoid rust and noise.
[ CERTIFICATE ]: Approved ISO9001:2000,ACS,TMV2, etc standards.
[ WARRANTY ]: 5 years
[ ACCESSORIES ]: Fitting parts included.
[ SERVICE ]: OEM & ODM, design customer's color box.
[TECHNICAL DATA]
1.Work pressure: 0.05Mpa—1Mpa
2.Ideal pressure: 0.1Mpa—0.5Mpa.Installation pressure rudicing valve when exceed ideal pressure. 3.Standard pressure: Dynamic pressure0.3±0.02Mpa.
4.Cold water supply temperature: 4-29°C hot water supply temperature: 55-85°C. Advice water supply temperature55-70°C.
5.Out water tempertature range: 20-50°C.
6.Set the safety temperature at 38°C.
7.Satety characteristic: If cold water supply fails,flow rate will be reduced to virtually shut off which avoid the risk of scalding.
8.Temperature accuracy:Kept constant ±1°C for the setting.
9.Out water temperature stability:when the temperature of water intake kept constant, Cold water or hot water pressure change 50% , the outlet water temperature changes in ±2°C of setting temperature. The supply water pressure kept constant;the temperature for hot water supply can be increases from 60°C to 75°C(5°C/min), the outlet water temperature changes in ±2°C of setting temperature
[ MANUFACTURE TECHNOLOGY]:Gravity die-casting brass body.
[ PLATING ]: Chrome-plated finish, Cr≥0.2μm,Ni≥12μm. Shining permanently.
[ SALT MIST TEST ]: 200 hours,corrosion status comply with international standard, anti-oxidation, anti-rust spot
[ CARTRIDGE ]: High quality durable cartrdige, more than 50,000~70,000 times(EN41) open and close.
[ AERATOR ]: Copper Shell, plastic core instead steel, avoid rust and noise.
[ CERTIFICATE ]: Approved ISO9001:2000,ACS,TMV2, etc standards.
[ WARRANTY ]: 5 years
[ ACCESSORIES ]: Fitting parts included.
[ SERVICE ]: OEM & ODM, design customer's color box.
[TECHNICAL DATA]
1.Work pressure: 0.05Mpa—1Mpa
2.Ideal pressure: 0.1Mpa—0.5Mpa.Installation pressure rudicing valve when exceed ideal pressure. 3.Standard pressure: Dynamic pressure0.3±0.02Mpa.
4.Cold water supply temperature: 4-29°C hot water supply temperature: 55-85°C. Advice water supply temperature55-70°C.
5.Out water tempertature range: 20-50°C.
6.Set the safety temperature at 38°C.
7.Satety characteristic: If cold water supply fails,flow rate will be reduced to virtually shut off which avoid the risk of scalding.
8.Temperature accuracy:Kept constant ±1°C for the setting.
9.Out water temperature stability:when the temperature of water intake kept constant, Cold water or hot water pressure change 50% , the outlet water temperature changes in ±2°C of setting temperature. The supply water pressure kept constant;the temperature for hot water supply can be increases from 60°C to 75°C(5°C/min), the outlet water temperature changes in ±2°C of setting temperature