ZR-80W LASER POWER SOURCES

Feature:

1. the 80W laser power supplies have good compatibility: the air cooling laser power supplies can work with most brand 1250mm,1400mm or 1450mm 80W or 90W glass laser tube,besides this feature, the network port laser power supplies also have strong adaptability and fast response, engraving or cutting benefits good effect.

2. the laser power control is simple, the network port laser power supplies can use 0-5V analog signal to control the laser power. Also the 80W laser power supplies can also use the PWM (pulse width modulation) signal for laser power control.

3. the air cooling laser power supplies have good protection function: the network port laser power supplies have open circuit protection to make the 80W laser power supplies to short-term work in the open state, so as to make it avoid the laser tube broken.

4. this 80W laser power supplies has simple control which selects high and low level for laser power control. the use of TTL-level control can realize start and stop. at the same time the air cooling laser power supplies add a protection switch, testing is made by external water and ventilation.

5. this 80W laser power supplies have stable laser output performance: Each air cooling power supplies have been much more testing procedures and under full load high temperature (52~55 degrees celsius) 24 hours of aging, which ensure the stability of each network port laser power supplies.

6. the ZR-80W laser power supplies uses ordinary H/L/P/G/IN/5V as laser control signal. and it uses aluminum top cover and galvanized plate bottom case

Specification