1. General Description

DS multistage split case pump, is a new generation of products combined the foreign technology and developed by our company after many years of research. It is the alternative to traditional section multistage pump. The fluid of DS pump is clean water, liquids containing a small amount of solid particles and corrosive liquid. It is mainly used for building high-rise water supply, industrial boilers, fire fighting, mine drainage, chemical, and a variety of industrial water systems.
 

2. The technical parameter of type XS pump:

Pump outlet diameter Dn: 80-1400mm

Capacity Q: 100-1000³/h

Head H:160-320m

Temperature T:-20℃-150℃

Solid parameter≤80mg/L

Working pressure≤4Mpa
 

3.Technical advantage

With two-stage impellers back to back in form, the axial force is balanced automatically. Canceled the necessary balance disc of the multistage pump, the reliability of pump is greatly increased and the trouble rate of the pump is reduced. It especially adapts to the application of the pump speed changes and the concentrated liquid’s viscosity.

Being short bearing span, it increases the rigidity of the shaft. The pump runs more smoothly and quietly. It especially adapts to the quiet situations.

Excellent hydraulic model, pump efficiency is higher than the multi-stage pumps with the same parameters, more energy saving and better environmental protection.

With the structure of the horizontal split case and suction inlet & outlet located in the lower part of the pump case, the pump is convenient to be operated, no need to remove the motor and pipe when maintenance. Therefore, it reduces the maintenance time and cost.
 

If you have any special requirement, please contact us without hesitation.