Product Main

Specifications

Product Description
1. General:
Type IH chemical centrifugal pump is used for transferring corrosive liquid without solid particles and viscosity similar to water in chemical works. The temperature of the liquid usually is 20 ℃-105 ℃. The maximum working pressure of the pump is 1.6MPa, Inlet pressure cannot be over 0.6MPa.
Performance range
Capacity Q: 6.3-400m³/h
Head H: 5-125m

2. Construction
The pump is single -stage single-suction overhanging centrifugal pump. The pump is back pull-out type. It is unnecessary to disturb the inlet piping, outlet piping and pump casing, the impeller can be dismantled for maintenance. The shaft seal adopts packing seal or mechanical seal according to customers' requirements. The pump uses rolling bearings which get lubricated with dilute oil.

3. The direction of rotation
The rotation of the pump rotor is clockwise looking from the motor to the pump.
The material of main parts of the pump
The medium-contacting parts are made of alloy stainless steel, material No. ZG1Cr18Ni12Mo2Ti, etc.
 
If you have any special requirement, please contact us without hesitation.