LDPE
Products Form
Color: Milky white
Shape: Round granular
Physical Properties
LDPE has good toughness, low temperature resistance,creep, and large thermal expansion.
LDPE is easy to process molding, can be extrusion, blow molding.
Products Form
Color: Milky white
Shape: Round granular
Physical Properties
LDPE has good toughness, low temperature resistance,creep, and large thermal expansion.
LDPE is easy to process molding, can be extrusion, blow molding.
|
Item
|
LDPE
|
|
Density(g/cm3)
|
0.92
|
|
Tension strength/Mpa
|
18
|
|
Elongation/%
|
1000
|
|
Embrittlement temperature C
|
-35
|
|
Melting Point/ C
|
155
|
HDPE-High Density Polyethylene
CAS: 9002-88-4
Grade: Blow molding grade, injection molding grade, etc.High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum
(in terms of energy and raw materials) to make one kilogram of HDPE.
Application: Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable
wire-insulating.
CAS: 9002-88-4
Grade: Blow molding grade, injection molding grade, etc.High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum
(in terms of energy and raw materials) to make one kilogram of HDPE.
Application: Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable
wire-insulating.
|
HDPE cable material
Property |
Unit
|
Typical Value |
|
Mass density
|
g/cm 3
|
0.941-0.959
|
|
Melt flow Rate(190 centidegree /2.16kg)
|
g/10min
|
MAX 1.0
|
|
Tensile yield strength
|
MPa
|
MIN 19.0
|
|
Flexural modulus
|
Mpa
|
MIN 965
|
|
Elongation@ break
|
%
|
MIN 400
|
|
Impact Embrittlement temperature
|
centidegree
|
MAX -118
|
|
Dielectric Constant
|
100KHZ
|
2.32
|
|
1MHZ
|
2.31
|
|
|
Loss Tangent
|
100KHZ
|
MAX 0.0001
|
|
1MHZ
|
MAX 0.0001
|
|
|
Volume resistivity
|
OHM-CM
|
MIN 1x10 15
|