First, the scope:

High-gloss clear finish PU 5F663 or stickers for a variety of solid wood furniture, high-mask surface.

Second, product characteristics:

1, high gloss, brightness maintain a long time
2, high definition, high transparency
3, good leveling, easy to sag vertical spray
4, easy to operate, thick coating from the pinhole is not easy, bubble
5, the film full, thick body
6, high hardness, good adhesion
7, high temperature, solvent clean surface, easy to yellow flour

Third, the light of basic physical properties of clear finish product:

Surface drying time: ≤ 50 Minutes (25 ℃)
Drying time: ≤ 24 Hours
(25 ℃)
Use time: ≤ 4 Hours
(25 ℃)
Film hardness: ≥ 1H (25 ℃, 24 hours)

Note: The detection method, coating paint on the iron plates with a thickness of about 23 microns.

Allocation ratio: light paint: hardener: thinner = 100:100:60 70

Fourth, supporting the use of products

Complete curing agent: H540 (PU light curing agent)
Supporting thinner: 2603 (PU surface with thinner)

V. Construction Notes:

1, the proportion of allocation of the required finish
2, used to mix, with good paint and filter;
3, a construction not too thick, or cause pinholes and bubbles;
4, according to results need to do it twice finish, luster and fullness will be better
5, paint, curing agents to be sealed after use

Note: The above data by the company laboratory test data for reference only.

VI, packaging and storage:

Packing 20KG / barrel. Store in a cool, ventilated, dry place for storage. Since the production of shelf life of six months from the date.