This machine changes the original grinding machine structure to integrate its body and underbed. When installed, it can be located on a base plane surface at onetime. Because its main bearing uses two row self-aligning spherical roller bearing, it can reduce energy consumption by 30%. The intrinsic grille pattern forced discharging is substituted by the overfall pattern controlling one. This can improve the milled granularity and the capacity can be increased by 15-20%

The ball mill is a key equipment for regrinding. It is widely used for the cement, the silicate product, new type building material, fire-proof material, chemical fertilizer, black and non-ferrous metal, glass, ceramics and etc. Our ball mill can grind ore or other materials that can be grinded either by wet process or by dry process.

The ball mill is a skeleton pattern ball mill with horizontal cylindrical turning gear, drive by outer gear and two hoppers. The material goes to the first hopper after the spiraling by the quill shaft from the feeding equipment. The hopper has ladder sheathing or corrugated sheathing with steel balls inside, which will fall under the effect of centrifugal force by barrel turning to ram hard and grind material. After the kibbling in the first hopper, by monolayer partition panel, the material will enter the second hopper, which has plane scale board with steel ball inside to grind material. The powder material will be discharged from the grid plate to finish the grinding.

Features and benefits of Ball Mill:

1.Double-row self-aligning spherical roller bearing replaces babbit-lined bearing. Friction resistance is greatly lowered down, easy to start and 20-30% of energy is saved.

2.Grooved and ringed liner increases contacting surface between balls and ores, improving milling effect and saving energy through its lifting effect to the materials.

3.All-in-one frame is used in middle-sized or small-sized machinery, facilitating engineering construction and equipment installation.

4.Large discharging outlet and high capacity,discharge coarse particles,usually used in first stage milling.

5.It can be used for grinding particles in the process of metal mineral resouces, such as gold, silver, iron, copper, lead, zinc etc., and non-metal mineral resources.